MM74HC86 Quad 2-Input Exclusive OR Gate May 2012 MM74HC86 Quad 2-Input Exclusive OR Gate Description Features The MM74HC86 exclusive OR gate utilizes advanced Typical Propagation Delay: 9ns silicon-gate CMOS technology to achieve operating speeds similar to equivalent LS-TTL gates, while Wide Operating Voltage Range: 26V maintaining the low power consumption and high noise Low Input Current: 1mA Maximum immunity characteristic of standard CMOS integrated circuits. These gates are fully buffered and have a Low Quiescent Current: 20mA Max. (74 Series) fanout of 10 LS-TTL loads. The 74HC logic family is Output Drive Capability: 10 LS-TTL Loads functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to V and ground. CC Table 1. Truth Table Inputs Outputs (1) A B Y L L L L H H H L H H H L Note: 1. Y A B AB AB Figure 1. Pin Assignments (Top View) Ordering Information Operating Part Number Package Packing Method Temperature Range MM74HC86M Tube 14-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow MM74HC86MX Tape & Reel -40 to +85C MM74HC86MTC Tube 14-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide MM74HC86MTCX Tape & Reel Note: 2. Pb-Free package per JEDEC J-STD-020B. 1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC86 Rev. 1.4.0 MM74HC86 Quad 2-Input Exclusive OR Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. Absolute maximum ratings are stress ratings only. Unless otherwise specified, all voltages are referenced to ground. Symbol Parameter Min. Max. Unit V Supply Voltage -0.5 7.0 V CC V DC Input Voltage -1.5 V +1.5 V IN CC V DC Output Voltage -0.5 V +0.5 V OUT CC I , I Clamp Diode Current 20 mA IK OK I DC Output Current, per Pin 25 mA OUT I DC VCC or GND Current, per Pin 50 mA CC T Storage Temperature Range -65 +150 C STG T Lead Temperature (Soldering, 10 Seconds) 260 C L (3, 4) P Power Dissipation 600 mW D Note: 3. Power dissipation temperature derating plastic N package: -12 mW/C from 65C to 85C. 4. S.O. package only 500mW. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Conditions Min. Max. Unit V Supply Voltage 2 6 V CC V , V DC Input or Output Voltage 0 V V IN OUT CC T Operating Temperature Range -40 +85 C A V = 2.0V 1000 CC t , t Input Rise or Fall Times V = 4.5V 500 ns R F CC V = 6.0V 400 CC 1983 Fairchild Semiconductor Corporation www.fairchildsemi.com MM74HC86 Rev. 1.4.0 2