ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MT9D131 1/3.2-Inch SystemOnAChip (SOC) CMOS Digital Image Sensor www.onsemi.com General Description The ON Semiconductor MT9D131 is a 1/3.2 inch, 2 Mp CMOS image sensor with an integrated advanced camera system. The camera system features a microcontroller (MCU) and a sophisticated image flow processor (IFP) with a real-time JPEG encoder. The microcontroller manages all components of the camera system and sets key operation parameters for the sensor core to optimize the quality of raw image data entering the IFP. The sensor core consists of an active pixel array of 1668 x 1248 pixels, programmable timing and 48 CLCC CASE TBD control circuitry including a PLL, analog signal chain with automatic offset correction and programmable gain, and two 10-bit A/D ORDERING INFORMATION converters (ADC). The entire system-on-a-chip (SOC) has ultra-low See detailed ordering and shipping information on page 4 of power requirements and superior low-light performance that is this data sheet. particularly suitable for surveillance applications. The excellent low-light performance of MT9D131 is one of the hallmarks of ON Semiconductors breakthrough low-noise CMOS High Resolution Security Camera imaging technology that achieves CCD image quality (based on Wireless Cameras signal-to-noise ratio and low-light sensitivity) while maintaining the Consumer Video Products inherent size, cost, power consumption, and integration advantages of CMOS. Features Superior Low-light Performance Feature Overview Ultra-low-power, Cost Effective The MT9D131 is a color image sensor with a Bayer color filter Internal Master Clock Generated by on-chip arrangement. Its basic characteristics are described in Table 1. Phase- locked Loop Oscillator (PLL) The MT9D131 has an embedded phase-locked loop oscillator (PLL) that can be used with the common wireless system clock. When in use, Electronic Rolling Shutter (ERS), the PLL adjusts the incoming clock frequency, allowing the MT9D131 Progressive Scan to run at almost any desired resolution and frame rate. To reduce Integrated Image Flow Processor (IFP) for power consumption, the PLL can be bypassed and powered down. Single-die Camera Module Low power consumption is a very important requirement for all Automatic Image Correction and components of wireless devices. The MT9D131 has numerous power Enhancement, Including Lens Shading conserving features, including an ultra low-power standby mode and Correction the ability to individually shut down unused digital blocks. Arbitrary Image Decimation with Another important consideration for wireless devices is their Anti-aliasing electromagnetic emission or interference (EMI). The MT9D131 has a Integrated Real-time JPEG Encoder programmable I/O slew rate to minimize its EMI and an output FIFO to eliminate output data bursts. Integrated Microcontroller for Flexibility The advanced IFP and flexible programmability of the MT9D131 Two-wire Serial Interface Providing Access provide a variety of ways to enhance and optimize the image sensor to Registers and Microcontroller Memory performance. Built-in optimization algorithms enable the MT9D131 Selectable Output Data Format: ITU-R to operate at factory settings as a fully automatic, highly adaptable BT.601 (YCbCr), 565RGB, 555RGB, camera. However, most of its settings are user-programmable. 444RGB, JPEG 4:2:2, JPEG 4:2:0, and raw 10-bit Applications Network Security Cameras Output FIFO for Data Rate Equalization ePTZ Cameras Programmable I/O Slew Rate Semiconductor Components Industries, LLC, 2006 1 Publication Order Number: November, 2016 Rev. 9 MT9D131/D