MT9V124 MT9V124 1/13Inch SystemOnAChip (SOC) CMOS Digital Image Sensor www.onsemi.com GENERAL DESCRIPTION ON Semiconductors MT9V124 is a 1/13-inch CMOS digital image sensor with an active-pixel array of 648 (H) 488 (V). It includes sophisticated camera functions such as auto exposure control, auto white balance, black level control, flicker detection and avoidance, and defect correction. It is designed for low light performance. It is programmable through a simple two-wire serial interface. The MT9V124 produces extraordinarily clear, sharp digital pictures that ODCSP25 2.694 2.694 make it the perfect choice for a wide range of medical and industrial CASE 570BN applications. Table 1. KEY PARAMETERS ORDERING INFORMATION Parameter Typical Value See detailed ordering and shipping information on page 2 of this data sheet. Optical Format 1/13-inch Active Pixels 648 488 = 0.3 Mp (VGA) Pixel Size 1.75 m Features (continued) Color Filter Array RGB Bayer Integrated Image Flow Processor (IFP) for Single-die Camera Module Shutter Type Electronic Rolling Shutter (ERS) One-time Programmable Memory (OTPM) Input Clock Range 1844 MHz Automatic Image Correction and Output LVDS 12-bit Packet Enhancement, Including Four-channel Lens Frame Rate, Full Resolution 30 fps Shading Correction Responsivity 1.65 V/lux sec Image Scaling with Anti-aliasing SNR 33.4 dB MAX Supports ITU-R BT.656 Format with Odd Dynamic Range 58 dB Timing Code Analog 2.53.1 V Two-wire Serial Interface Providing Access Digital 1.71.95 V Supply Voltage to Registers and Microcontroller Memory Digital I/O 1.71.95 V or 2.53.1 V Selectable Output Data Format: YCbCr, Power Consumption 55 mW 565RGB, and RAW8+2-bit, BT656 Operating Temperature (Ambient) TA 30C to +70C High Speed Serial Data Output in 12-bit Chief Ray Angle Packet 24 Independently Configurable Gamma Package Options Bare die, CSP Correction Direct XDMA Access Features (Reducing Serial Commands) Superior Low-light Performance Integrated Hue Rotation 22 Ultra-low-power Applications VGA Video at 30fps Medical Tools, Device Internal Master Clock Generated by On-chip Phase Locked Loop Biometrics (PLL) Oscillator Industrial Application Electronic Rolling Shutter (ERS), Progressive Scan Semiconductor Components Industries, LLC, 2010 1 Publication Order Number: June, 2018 Rev. 6 MT9V124/DCONFIDENTIAL AND PROPRIETARY NOT FOR PUBLIC RELEASE MT9V124 ORDERING INFORMATION Table 2. AVAILABLE PART NUMBERS Part Number Product Description Orderable Product Attribute Description MT9V124D00STCK22DC1200 RGB color die Die Sales, 200 m Thickness MT9V124EBKSTCCR CSP with 400 m coverglass Chip Tray without Protective Film For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. FUNCTIONAL DESCRIPTION See the ON Semiconductor Device Nomenclature The entire system-on-a-chip (SOC) has an ultra-low power operational mode and a superior low-light document (TND310/D) for a full description of the naming performance that is particularly suitable for medical convention used for image sensors. For reference applications. The MT9V124 features ON Semiconductors documentation, including information on evaluation kits, breakthrough low-noise CMOS imaging technology that please visit our web site at www.onsemi.com. achieves near-CCD image quality (based on signal-to-noise ON Semiconductors MT9V124 is a 1/13-inch VGA ratio and low-light sensitivity) while maintaining the CMOS digital image sensor with an integrated advanced inherent size, cost, and integration advantages of CMOS. camera system. This camera system features a microcontroller (MCU), a sophisticated image flow Architecture Overview processor (IFP), and a serial port (using LVDS signaling). The MT9V124 combines a VGA sensor core with an IFP The microcontroller manages all functions of the camera to form a stand-alone solution for both image acquisition system and sets key operation parameters for the sensor core and processing. Both the sensor core and the IFP have to optimize the quality of raw image data entering the IFP. internal registers that can be controlled by the user. In The sensor core consists of an active pixel array of normal operation, an integrated microcontroller 648 488 pixels with programmable timing and control autonomously controls most aspects of operation. The circuitry. It also includes an analog signal chain with processed image data is transmitted to the external host automatic offset correction, programmable gain, and a system through an LVDS bus. Figure 1 shows the major 10-bit analog-to-digital converter (ADC). functional blocks of the MT9V124. Register Bus V V DD PP Image Data Bus V V DDIO AA CCI Serial PLL S DATA Interface SCLOCK Pixel Array (648 x 488) RAM ROM Column Control uControroller STANDBY LVDS N EXTCLK LVDS P Analog Digital Image ADC Processing Processing (SOC) A D GND GND Figure 1. MT9V124 Block Diagram www.onsemi.com 2 Column Control F IFO Serializer