RPR-0521RS-EVK-001 ROHM

Users Guide Ambient Light Sensor and Proximity Sensor RPR-0521RS-EVK-001 Manual RPR-0521RS-EVK-001 is an evaluation board for RPR-0521RS, which is a ROHM Ambient Light Sensor and Proximity Sensor . This Users Guide 1 is about how to use RPR-0521RS-EVK-001 together with SensorShield* . *1 SensorShield is sold as Shield-EVK-001. Preparation Arduino Uno 1pc Personal Computer installed Arduino IDE 1pc Requirement : Arduino 1.6.7 or higher Please use Arduino IDE which can be downloaded from the link below: RPR-0521RS-EVK-001 Manual Users Guide 5. Check log of Serial Monitor (Figure 6) Measurement 1. Select Tools and check the contents enclosed in the red frame. (Figure 3) Board should be Arduino/Genuino Uno and Port should be COMxx (Arduino/Genuino Uno). COM port number is different in each environment. Figure 6. Serial Monitor Board Information Figure 3. COM Port setting 2. Write the program by pressing right arrow button for upload (Figure 4) 3. Wait for the message Done uploading (Figure 4) Figure 7. Picture of the board Figure 4. Uploading 4. Select Tools -> Serial Monitor (Figure 5) Table 1. Parts information Figure 5. Tools Setting 2017 ROHM Co., Ltd. No. 60UG059E Rev.002 2/2 E Rev.001 NOV.2018