NB2305AI1DTG ON Semiconductor

NB2305A 3.3 V Zero Delay Clock Buffer The NB2305A is a versatile, 3.3 V zero delay buffer designed to distribute highspeed clocks. It accepts one reference input and drives out five lowskew clocks. It is available in a 8 pin package. www.onsemi.com The 1H version of the NB2305A operates at up to 133 MHz, and has higher drive than the 1 devices. All parts have onchip PLLs that MARKING lock to an input clock on the REF pin. The PLL feedback is onchip DIAGRAMS* and is obtained from the CLKOUT pad. Multiple NB2305A devices can accept the same input clock and 8 8 distribute it. In this case the skew between the outputs of the two XXXX 1 devices is guaranteed to be less than 700 ps. ALYW All outputs have less than 200 ps of cycletocycle jitter. The input SOIC8  D SUFFIX 1 and output propagation delay is guaranteed to be less than 350 ps, and CASE 751 the output to output skew is guaranteed to be less than 250 ps. The NB2305A is available in two different configurations, as shown 8 in the ordering information table. The NB2305AI is the base part. The 8 XXX NB2305AI1H is the high drive version of the 1 and its rise and fall YWW times are much faster than 1 part. A  1 1 Features TSSOP8 DT SUFFIX 15 MHz to 133 MHz Operating Range, Compatible with CPU and CASE 948S PCI Bus Frequencies Zero Input Output Propagation Delay XXXX = Device Code Multiple LowSkew Outputs A = Assembly Location L = Wafer Lot OutputOutput Skew Less than 250 ps Y = Year DeviceDevice Skew Less than 700 ps W = Work Week  = PbFree Package One Input Drives 5 Outputs Less than 200 ps CycletoCycle Jitter is Compatible with Pentium *For additional marking information, refer to Based Systems Application Note AND8002/D. Accepts Spread Spectrum Clock at the Input Available in 8 Pin, 150 mil SOIC Package and 8 Pin TSSOP 4.4 mm 3.3 V Operation, Advanced 0.35  CMOS Technology ORDERING INFORMATION Guaranteed Across Commercial and Industrial Temperature Ranges See detailed ordering, marking and shipping information in the package dimensions section on page 6 of this data sheet. These are PbFree Devices Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: May, 2015 Rev. 11 NB2305A/DNB2305A PLL CLKOUT REF REF 1 8 CLKOUT CLK1 2 CLK2 7 CLK4 NB2305A CLK2 CLK1 3 6 V DD CLK3 GND 4 5 CLK3 CLK4 Figure 1. Block Diagram Figure 2. Pin Configuration Table 1. PIN DESCRIPTION Pin # Pin Name Description 1 REF (Note1) Input reference frequency, 5 V tolerant input. 2 CLK2 (Note 2) Buffered clock output. 3 CLK1 (Note 2) Buffered clock output. 4 GND Ground. 5 CLK3 (Note 2) Buffered clock output. 6 V 3.3 V supply. DD 7 CLK4 (Note 2) Buffered clock output. 8 CLKOUT (Note 2) Buffered clock output, internal feedback on this pin. 1. Weak pulldown. 2. Weak pulldown on all outputs. www.onsemi.com 2