NCP700CMT45TBG ON Semiconductor

NCP700C LDO Regulator - Ultra Low Noise, High PSRR, BiCMOS RF 200 mA NCP700C V V IN OUT 6 1 IN OUT NCP700C 4 3 EN BYP ON GND C C NOISE C IN OUT OFF 2 10 nF 1 F 1 F Figure 1. NCP700C Typical Application IN OUT Bandgap Current - Reference Limit + Voltage BYP EN R GND PD Figure 2. Simplified Block Diagram PIN FUNCTION DESCRIPTION Pin No. Pin Name Description 1 OUT Regulated Output Voltage 2 GND Power Supply Ground 3 BYP Noise reduction pin. (Connect 10 nF or 100 nF capacitor to GND) Enable pin: This pin allows on/off control of the regulator. To disable the device, connect to GND. If this 4 EN function is not in use, connect to Vin. Internal 5 M Pull Down resistor is connected between EN and GND. 5 N/C Not connected 6 IN Input Voltage MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage IN 0.3 V to 6 V V Chip Enable Voltage EN 0.3 V to V +0.3 V IN Noise Reduction Voltage BYP 0.3 V to V +0.3 V V IN Output Voltage OUT 0.3 V to V +0.3 V V IN Output shortcircuit duration Infinity Maximum Junction Temperature T 150 C J(max) Storage Temperature Range T 55 to 150 C STG Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functional- ity should not be assumed, damage may occur and reliability may be affected. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V tested per MILSTD883, Method 3015 Machine Model Method 200 V