NCV8715 Linear Voltage Regulator - Low Dropout, Ultra-Low Iq, Wide Input Voltage 50 mA www.onsemi.com The NCV8715 is 50 mA LDO Linear Voltage Regulator. It is a very stable and accurate device with ultralow ground current consumption MARKING (4.7 A over the full output load range) and a wide input voltage range DIAGRAMS (up to 24 V). The regulator incorporates several protection features such as Thermal Shutdown and Current Limiting. 1 XXXM Features XDFN6 CASE 711AE Operating Input Voltage Range: 2.5 V to 24 V Fixed Voltage Options Available: 1.2 V to 5.0 V Ultra Low Quiescent Current: Max. 5.8 A Over Full Load and Temperature 2% Accuracy Over Full Load, Line and Temperature Variations XXX M SC705 PSRR: 52 dB at 100 kHz (SC88A) Noise: 190 V from 200 Hz to 100 kHz CASE 419A RMS Thermal Shutdown and Current Limit protection Available in XDFN6 1.5 x 1.5 mm and SC70 (SC88A) Package XXX = Specific Device Code M = Date Code NCV Prefix for Automotive and Other Applications Requiring = PbFree Package Unique Site and Control Change Requirements AECQ100 (Note: Microdot may be in either location) Qualified and PPAP Capable Device Temperature Grade 1: 40C to +125C Ambient Operating Temperature Range ORDERING INFORMATION These Devices are PbFree, Halogen Free/BFR Free and are RoHS See detailed ordering, marking and shipping information on Compliant page 19 of this data sheet. Typical Applications Infotainment, Audio Communication Systems Safety Systems 1.2 V < V < 5 V out 2.5 V < V < 24 V out OUT IN NCV8715 1 F 1 F Ceramic Ceramic NC NC GND Figure 1. Typical Application Schematic Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: October, 2019 Rev. 7 NCV8715/DNCV8715 IN THERMAL UVLO SHUTDOWN BANDGAP MOSFET REFERENCE DRIVER WITH CURRENT LIMIT OUT EEPROM GND Figure 2. Simplified Block Diagram Figure 3. Pin Description PIN FUNCTION DESCRIPTION Pin No. SC70 XDFN6 Pin Name Description 5 6 OUT Regulated output voltage pin. A small 0.47 F ceramic capacitor is needed from this pin to ground to assure stability. 1 2 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 2 3 GND Power supply ground. 3 4 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 5 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 4 1 IN Input pin. A small capacitor is needed from this pin to ground to assure stability. www.onsemi.com 2