NL17SH125P5T5G ON Semiconductor

T NL17SH125 Non-Inverting 3-State Buffer The NL17SH125 MiniGate is an advanced highspeed CMOS noninverting buffer in ultrasmall footprint. The NL17SH125 requires the 3 state control input (OE) to be set High to place the output in the high impedance state. The NL17SH125 input structures provide protection when voltages NL17SH125 MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V DC Input Voltage 0.5 to +7.0 V IN V DC Output Voltage 0.5 to V + 0.5 V OUT CC I DC Input Diode Current V < GND 20 mA IK IN I DC Output Diode Current V < GND, V > V 20 mA OK OUT OUT CC I DC Output Source/Sink Current 12.5 mA OUT I DC Supply Current per Supply Pin 25 mA CC I DC Ground Current per Ground Pin 25 mA GND T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature Under Bias +150 C J MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 0.125 in R V ESD Withstand Voltage Human Body Model (Note 2) >3000 V ESD Machine Model (Note 3) >150 Charged Device Model (Note 4) N/A I Latchup Performance Above V and Below GND at 125C (Note 5) 100 mA LATCHUP CC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2ounce copper trace with no air flow. 2. Tested to EIA/JESD22A114 A. 3. Tested to EIA/JESD22A115 A. 4. Tested to JESD22C101A. 5. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Characteristics Min Max Unit V Positive DC Supply Voltage 1.65 5.5 V CC V Digital Input Voltage 0.0 5.5 V IN V Output Voltage 0.0 V V OUT CC T Operating Temperature Range 55 +125 C A t / V Input Transition Rise or Fail Rate V = 3.3 V 0.3 V 0 100 ns/V CC V = 5.0 V 0.5 V 0 20 CC