NL3S22AH, NL3S22UH USB 2.0 + Audio Switch The NL3S22AH/NL3S22UH is a doublepole/doublethrow (DPDT) analog switch for routing high speed differential data and audio. The differential channels are compliant with High Speed USB 2.0, Full Speed USB 1.1, Low Speed USB 1.0 and any generic UART protocol. The multipurpose audio path is capable of passing signals wwwwww..onsemi.comonsemi.com with negative voltages as low as 3 V below ground and features shunt resistors to reduce Pop and Click noise in the audio system. For the NL3S22AH, the audio path (AUDP/AUDN) will be selected MARKING with SEL=0 with the device enabled (EN = 1). For the NL3S22UH, DIAGRAM the high speed data path (HDP/HDN) will be selected with SEL=0 with the device enabled (EN = 1). UQFN10 XX M CASE 488AT Features 1 V Range: 2.7 V to 3.7 V CC XX = AY for NL3S22AHMUTAG Control Pins Compatible with 1.8 V Interfaces = DW for NL3S22UHMUTAG M = Date Code I : 60 A (Typ) CC = PbFree Device ESD Performance: 2 kV HBM (Note: Microdot may be in either location) Available in 1.4 mm x 1.8 mm UQFN10 These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant ORDERING INFORMATION High Speed Data Path Device Package Shipping Input Signal Range: 0 V to 4.5 V NL3S22AHMUTAG UQFN10 3000 / Tape & R : 5.4 (Typ) (PbFree) Reel DS(on) C : 8.7 pF (Typ) ON NL3S22UHMUTAG UQFN10 3000 / Tape & Data Rate: USB 2.0Compliant up to 480 Mbps (PbFree) Reel Bandwidth: >811 MHz For information on tape and reel specifications, including part orientation and tape sizes, please Audio Path refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Input Signal Range: 3.0 V to 3.0 V R : 0.56 (Typ) DSON R : 0.004 (Typ) ON(FLAT) THD+N: 113 dB (R = 32 / V = 1.0 V ) L IS RMS 109 dB (R = 16 / V = 0.4 V ) L IS RMS Applications Smartphones Tablets USB 2.0 Hosts/Peripherals Audio / HighSpeeds Data Switching USB TypeC Switching Semiconductor Components Industries, LLC, 2017 1 Publication Order Number: July, 2018 Rev. 3 NL3S22AH/DNL3S22AH, NL3S22UH V CC HDP D+ AUDP Shunt HDN D AUDN Shunt EN Control Logic SEL GND Figure 1. Block Diagram FUNCTION TABLE SEL EN NL3S22AH NL3S22UH Shunt Status D+/D Function 0 X X ON No Connect (Power Down) 1 0 1 OFF AUDP/AUDN 1 1 0 ON HDP/HDN Figure 2. UQFN10 Top Through View PIN DESCRIPTION Pin Name Pin Description HDP 1 High Speed Differential Data (+) HDN 2 High Speed Differential Data () GND 3 Ground AUDN 4 Audio Signal () SEL 5 Function Select D 6 Audio/Data Common I/O () D+ 7 Audio/Data Common I/O (+) EN 8 Chip Enable AUDP 9 Audio Signal (+) V 10 Power Supply CC www.onsemi.com 2