NLU1GT125AMX1TCG ON Semiconductor

NLU1GT125 Non-Inverting 3-State Buffer, TTL Level LSTTLCompatible Inputs The NLU1GT125 MiniGate is an advanced CMOS highspeed noninverting buffer in ultrasmall footprint. The NLU1GT125 requires the 3 state control input OE to be set NLU1GT125 MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V DC Input Voltage 0.5 to +7.0 V IN V DC Output Voltage 0.5 to +7.0 V OUT I DC Input Diode Current V < GND 20 mA IK IN I DC Output Diode Current V < GND 20 mA OK OUT I DC Output Source/Sink Current 12.5 mA O I DC Supply Current Per Supply Pin 25 mA CC I DC Ground Current per Ground Pin 25 mA GND T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature Under Bias 150 C J MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 0.125 in R I Latchup Performance Above V and Below GND at 125C (Note 2) 500 mA LATCHUP CC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA / JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V Positive DC Supply Voltage 1.65 5.5 V CC V Digital Input Voltage 0 5.5 V IN V Output Voltage 0 5.5 V OUT T Operating FreeAir Temperature 55 +125 C A t/ V Input Transition Rise or Fall Rate V = 3.3 V 0.3 V 0 100 ns/V CC V = 5.0 V 0.5 V 0 20 CC