NLU2G06AMX1TCG ON Semiconductor

NLU2G06 Dual Inverter, Open Drain The NLU2G06 MiniGate is an advanced highspeed CMOS dual inverter with open drain output in ultrasmall footprint. The NLU2G06 input and output structures provide protection when voltages up to 7.0 V are applied, regardless of the supply voltage. NLU2G06 MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V DC Input Voltage 0.5 to +7.0 V IN V DC Output Voltage 0.5 to +7.0 V OUT I DC Input Diode Current V < GND 20 mA IK IN I DC Output Diode Current V < GND 20 mA OK OUT I DC Output Source/Sink Current 12.5 mA O I DC Supply Current Per Supply Pin 25 mA CC I DC Ground Current per Ground Pin 25 mA GND T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature Under Bias 150 C J MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 0.125 in R I Latchup Performance Above V and Below GND at 125 C (Note 2) 500 mA LATCHUP CC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA / JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V Positive DC Supply Voltage 1.65 5.5 V CC V Digital Input Voltage 0 5.5 V IN V Output Voltage 0 5.5 V OUT T Operating FreeAir Temperature 55 +125 C A t/ V Input Transition Rise or Fall Rate V = 3.3 V 0.3 V 0 100 ns/V CC V = 5.0 V 0.5 V 0 20 CC