NLX2G17CMX1TCG ON Semiconductor

4 K K K Q NLX2G17 Dual Schmitt-Trigger Buffer The NLX2G17 MiniGate is an advanced highspeed CMOS dual noninverting Schmitttrigger buffer in ultrasmall footprint. The NLX2G17 input and output structures provide protection when voltages up to 7.0 V are applied, regardless of the supply voltage. The NLX2G17 can be used to enhance noise immunity or to square NLX2G17 MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V DC Input Voltage 0.5 to +7.0 V IN V DC Output Voltage 0.5 to +7.0 V OUT I DC Input Diode Current V < GND 50 mA IK IN I DC Output Diode Current V < GND 50 mA OK OUT I DC Output Source/Sink Current 50 mA O I DC Supply Current Per Supply Pin 100 mA CC I DC Ground Current per Ground Pin 100 mA GND T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature Under Bias 150 C J MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 0.125 in R I Latchup Performance Above V and Below GND at 125 C (Note 5) 500 mA LATCHUP CC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA/JESD22A114 A. 3. Tested to EIA/UESD22A115 A. 4. Tested to JESD22C101A. 5. Tested to EIA / JESD78. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V Positive DC Supply Voltage 1.65 5.5 V CC V Digital Input Voltage 0 5.5 V IN V Output Voltage 0 5.5 V OUT T Operating FreeAir Temperature 55 +125 C A t/ V Input Transition Rise or Fall Rate V = 2.5 V 0.2 V 0 No Limit ns/V CC V = 3.3 V 0.3 V 0 No Limit CC V = 5.0 V 0.5 V 0 No Limit CC