DATA SHEET www.onsemi.com PYTHON 5.0/2.0 MegaPixels Global Shutter CMOS Image Sensors NOIP1SN5000A Features Data Output Options P1SN/SE/FN: 8 LVDS Data Channels P3SN/SE: 4 LVDS Data Channels Size Options PYTHON 2000: 1920 x 1200 Active Pixels, 2/3 Optical Format Figure 1. PYTHON 5000 PYTHON 5000: 2592 x 2048 Active Pixels, 1 Optical Format 4.8 m x 4.8 m Low Noise Global Shutter Pixels with In-pixel CDS ORDERING INFORMATION Monochrome (SN), Color (SE) and NIR (FN) See detailed ordering and shipping information on page 2 of this data sheet. Zero Row Overhead Time Mode Enabling Higher Frame Rate Frame Rate at Full Resolution, 8 LVDS Data Channels (P1SN/SE/FN only) 100/85 frames per second 5 MP (Zero ROT/NonZero ROT) 230/180 frames per second 2 MP (Zero ROT/NonZero ROT) 255/200 frames per second Full HD (Zero ROT/NonZero ROT) On-chip 10-bit Analog-to-Digital Converter (ADC) Description Eight/Four/Two/One LVDS High Speed Serial Outputs The PYTHON 2000 and PYTHON 5000 image sensors Random Programmable Region of Interest (ROI) utilize high sensitivity 4.8 m x 4.8 m pixels that support Readout low noise pipelined and triggered global shutter readout Serial Peripheral Interface (SPI) modes. The sensors support correlated double sampling Automatic Exposure Control (AEC) (CDS) readout, reducing noise and increasing dynamic Phase Locked Loop (PLL) range. The sensor has on-chip programmable gain amplifiers and Dual Power Supply (3.3 V and 1.8 V) 10-bit A/D converters. The integration time and gain 40C to +85C Operational Temperature Range parameters can be reconfigured without any visible image 84-pin LCC and 128pad LGA artifact. Optionally the on-chip automatic exposure control Power Dissipation loop (AEC) controls these parameters dynamically. The 1.45 W (P1SN/SE/FN, 8 LVDS, NZROT) images black level is either calibrated automatically or can 915 mW (P1SN/SE/FN, P3SN/SE, 4 LVDS, be adjusted by adding a user programmable offset. NZROT) A high level of programmability using a four wire serial 520 mW (P1SN/SE/FN, P3SN/SE, 2 LVDS, peripheral interface enables the user to read out specific NZROT) regions of interest. Up to sixteen regions can be 370 mW (P1SN/SE/FN, P3SN/SE, 1 LVDS, programmed, achieving even higher frame rates. NZROT) The image data interface of the P1SN/SE/FN devices These Devices are PbFree and are RoHS Compliant consists of eight LVDS lanes, facilitating frame rates up to Applications 100 frames per second in Zero ROT mode for the PYTHON 5000. Each channel runs at 720Mbps. A separate Machine Vision synchronization channel containing payload information is Motion Monitoring provided to facilitate the image reconstruction at the Security receiving end. Intelligent Traffic Systems (ITS) Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: August, 2021 Rev. 6 NOIP1SN5000A/DNOIP1SN5000A The P3SN/SE devices are the same as the P1SN/SE/FN facilitating frame rates of 45 frames per second in Non Zero but with only four of the eight LVDS data channels enabled, ROT (NZROT) for the PYTHON 5000. ORDERING INFORMATION Part Number Description Package PYTHON 5000 NOIP1SN5000AQDI 5 MegaPixel, Monochrome 84pin LCC NOIP1SE5000AQDI 5 MegaPixel, Bayer Color NOIP1FN5000AQDI 5 MegaPixel, Monochrome with enhanced NIR NOIP1SN5000AQTI 5 MegaPixel, Monochrome, Protective Film NOIP1SE5000AQTI 5 MegaPixel, Bayer Color, Protective Film NOIP1FN5000AQTI 5 MegaPixel, Monochrome with enhanced NIR, Protective Film NOIP3SN5000AQDI 5 MegaPixel, 4 LVDS Outputs, Monochrome NOIP3SE5000AQDI 5 MegaPixel, 4 LVDS Outputs, Bayer Color NOIP3SN5000AQTI 5 MegaPixel, 4 LVDS Outputs, Monochrome, Protective Film NOIP3SE5000AQTI 5 MegaPixel, 4 LVDS Outputs, Bayer Color, Protective Film NOIP1SN5000ALTI 5 MegaPixel, Monochrome, Protective Film 128pad LGA NOIP1SE5000ALTI 5 MegaPixel, Bayer Color, Protective Film NOIP1FN5000ALTI 5 MegaPixel, Monochrome with enhanced NIR, Protective Film NOIP3SN5000ALTI 5 MegaPixel, 4 LVDS Outputs, Monochrome, Protective Film NOIP3SE5000ALTI 5 MegaPixel, 4 LVDS Outputs, Bayer Color, Protective Film PYTHON 2000 NOIP1SN2000AQDI 2 MegaPixel, Monochrome 84pin LCC NOIP1SE2000AQDI 2 MegaPixel, Bayer Color NOIP1FN2000AQDI 2 MegaPixel, Monochrome with enhanced NIR NOIP1SN2000AQTI 2 MegaPixel, Monochrome, Protective Film NOIP1SE2000AQTI 2 MegaPixel, Bayer Color, Protective Film NOIP1FN2000AQTI 2 MegaPixel, Monochrome with enhanced NIR, Protective Film NOIP1SN2000ALTI 2 MegaPixel, Monochrome, Protective Film 128pad LGA NOIP1SE2000ALTI 2 MegaPixel, Bayer Color, Protective Film NOIP1FN2000ALTI 2 MegaPixel, Monochrome with enhanced NIR, Protective Film The P1SN/SE/FN base part references the mono, color and NIR enhanced versions of the 8 LVDS interface the P3SN/SE base part references the mono and color version of the 4 LVDS interface. More details on the part number coding can be found at