NOIL2SC1300A-GDC ON Semiconductor

NOIL2SM1300A LUPA1300-2: High Speed CMOS Image Sensor Features 1280 x 1024 Active Pixels 14 m X 14 m Square Pixels www.onsemi.com 1.4 Optical Format Monochrome or Color Digital Output 500 fps Frame Rate On-Chip 10-Bit ADCs 12 LVDS Serial Outputs Random Programmable ROI Readout Pipelined and Triggered Global Shutter On-Chip Column FPN Correction Serial Peripheral Interface (SPI) Limited Supplies: Nominal 2.5 V and 3.3 V 50C to +85C Operational Temperature Range 168-Pin PGA Package Power Dissipation: 1350 mW These Devices are PbFree and are RoHS Compliant Applications High Speed Machine Vision Figure 1. LUPA13002 Die Photo Motion Analysis Medical Imaging Intelligent Traffic System Industrial Imaging Description The LUPA1300-2 is an integrated SXGA high speed, high conversion, on-chip timing for a wide range of operating sensitivity CMOS image sensor. This sensor targets high modes, and has an LVDS interface for easy system speed machine vision and industrial monitoring integration. applications. The LUPA1300-2 sensor runs at 500 fps and By removing the visually disturbing column patterned has triggered and pipelined shutter modes. It packs 24 noise, this sensor enables building a camera without any parallel 10-bit A/D converters with an aggregate conversion offline correction or the need for memory. In addition, the rate of 740 MSPS. On-chip digital column FPN correction on-chip column FPN correction is more reliable than an enables the sensor to output ready to use image data for most offline correction, because it compensates for supply and applications. To enable simple and reliable system temperature variations. The sensor requires one master integration, the 12 channels, 1 sync channel, 8 Gbps, and clock for operations up to 500 fps. LVDS serial link protocol supports skew correction and The LUPA1300-2 is housed in a 168 pin PGA package serial link integrity monitoring. and is available in a monochrome version and Bayer (RGB) The peak responsivity of the 14 m x 14 m 6T pixel is patterned color filter array. The monochrome version is also 2 63 DN/nJ/cm . Dynamic range is measured at 57 dB. In full available without glass. Contact your local frame video mode, the sensor consumes 1350 mW from the ON Semiconductor office. 2.5 V and 3.3 V power supplies. The sensors integrate A/D Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: July, 2015 Rev. 11 NOIL2SM1300A/DNOIL2SM1300A ORDERING INFORMATION Marketing Part Number Description Package NOIL2SM1300A-GDC Mono with Glass 168 pin PGA NOIL2SM1300A-GWC Mono without Glass NOIL2SC1300A-GDC Color with Glass ORDERING CODE DEFINITION N O I L2SDM 1300 A G C ON Semiconductor Opto Temperature Range Image Sensors D = D263 Glass, W = Windowless L2: LUPA Family Package G = cPGA Additional Functionality S: Standard Process 1300: 1.3 MegaPixel Resolution M = Mono C = Color PRODUCT PACKAGE MARK XXXXX = Specific Device Code A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week NNNN = Serial Number Figure 2. Marking Diagram Line 1: NOIL2Sx1300AGyC where x denotes M = mono and C = color y denotes D = D263 glass and W = windowless. Line 2: AWLYYWW where AWL is PRODUCTION lot traceability, YYWW is the 4digit date code www.onsemi.com 2