P2I2305NZ 3.3V 1:5 Clock Buffer Functional Description P2I2305NZ is a low cost high speed buffer designed to accept one clock input and distribute up to five clocks in mobile PC systems and desktop PC systems. The device operates at 3.3 V and outputs can run P2I2305NZ PIN CONFIGURATION BUF IN 1 OUTPUT5 8 OUTPUT1 OUTPUT4 2 7 OUTPUT2 3 6 V DD GND 45 OUTPUT3 Figure 2. P2I2305NZ Pin Configuration (Top View) Table 1. PIN DESCRIPTION Pin Pin Name Description 6 V 3.3 V, Supply Voltage DD 4 GND Ground 1 BUF IN Clock Input 2, 3, 5, 7, 8 OUTPUT 1:5 Clock Outputs Table 2. ABSOLUTE MAXIMUM RATINGS Parameter Min Max Unit Supply Voltage to Ground Potential 0.5 +4.6 V DC Input Voltage (Except REF) 0.5 V + 0.5 V DD DC Input Voltage (REF) 0.5 7 V Storage Temperature 65 +150 C Max. Soldering Temperature (10 sec) 260 C Junction Temperature 150 C Static Discharge Voltage 2000 V (As per JEDEC STD22 A114 B) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. OPERATING CONDITIONS Parameter Description Min Max Unit V Supply Voltage 3.0 3.6 V DD T Operating Temperature 40 85 C A C Load Capacitance, F < 100 MHz 30 pF L out Load Capacitance, 100 MHz < F < 133.33 MHz 15 pF out C Input Capacitance 7 pF IN BUF IN, Operating Frequency DC 133.33 MHz OUTPUT 1:5 t Powerup time for all V s to reach minimum specified voltage (power 0.05 50 mS PU DD ramps must be monotonic)