Thru-beam sensor M100/MV100-RT/35/76a/95/103 Dimensions 20 11 3 11 Receiver Emitter 10.6 M8 x 1 Model Number M100/MV100-RT/35/76a/95/103 Electrical connection Thru-beam sensor with 4-pin, M8 x 1 connector Transmitter Receiver 1 +UB 1 +UB Features Miniature design 2 2 Test n.c. Easy to use n.c. Very bright, highly visible light spot Full metal thread mounting 3 0 V 3 0 V Highly visible LEDs for Power ON and switching state 4 4 Q IN Not sensitive to ambient light Product information = Light on = Dark on The ML100 series is characterized by its miniature housing with integral, all-metal Pinout threaded bushings. All versions are equip- ped with a visible red transmitter LED. This greatly simplifies installation and commissio- ning. The switching states are easily visible from all directions thanks to the highly visible 24 LEDs. 13 Indicators/operating means 1 4 2 1 Light-Dark-switching 2 Sensitivity adjuster 3 Signal display yellow 4 Operating display green 3 Subject to modifications without notice Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 1 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Release date: 2011-08-23 14:12 Date of issue: 2011-08-23 214743 eng.xml 14.1 10.6 4.1 M3 2.8 25.4 31 34.2 12.1Thru-beam sensor M100/MV100-RT/35/76a/95/103 Technical data Accessories System components OMH-ML100-03 Emitter M100-RT/35/76a/95 Mounting aid for round steel 12 mm or Receiver MV100-RT/35/95/103 sheet 1.5 mm ... 3 mm General specifications Effective detection range 0 ... 20 m OMH-ML100-04 Threshold detection range 30 m Mounting bracket Light source LED OMH-ML100-05 Light type modulated visible red light Approvals CE, cULus Listed 57M3 (Only in association with UL Class 2 Mounting bracket power supply Type 1 enclosure) OMH-F10-ML100 Diameter of the light spot approx. 2 m at a distance of 30 m Angle of divergence approx. 2 Mounting aid for ML100 series Optical face frontal OMH-10 Ambient light limit EN 60947-5-2 Mounting aid Functional safety related parameters MTTF 860 a d V3-GM-2M-PUR Mission Time (T ) 20 a M Cable socket, M8, 3-pin, PUR cable Diagnostic Coverage (DC) 0 % Indicators/operating means V3-WM-2M-PUR Operating display LED green: power on Cable socket, M8, 3-pin, PUR cable Function display Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control OFF when light beam Additional accessories can be found in the is interrupted Internet. Controls sensitivity adjustment Controls Light/Dark switch Electrical specifications Operating voltage U 10 ... 30 V DC , class 2 B Ripple max. 10 % No-load supply current I Emitter: 15 mA 0 Receiver: 8 mA Input Test input emitter deactivation at +U B Output Switching type light/dark on, switchable Signal output 1 PNP output, short-circuit protected, protected from reverse polarity, open collector Switching voltage max. 30 V DC Switching current max. 100 mA , resistive load Voltage drop U 1.5 V DC d Switching frequency f 250 Hz Response time 2 ms Ambient conditions Ambient temperature -30 ... 60 C (-22 ... 140 F) Storage temperature -40 ... 70 C (-40 ... 158 F) Mechanical specifications Protection degree IP67 Connection M8 x 1 connector, 4-pin Material Housing PC (Polycarbonate) Optical face PMMA Mass approx. 20 g (emitter and receiver) Compliance with standards and directi- ves Directive conformity EMC Directive 2004/108/EC EN 60947-5-2 Standard conformity Standards UL 508 Approvals and certificates UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. Subject to modifications without notice Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 2 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Release date: 2011-08-23 14:12 Date of issue: 2011-08-23 214743 eng.xml