SPC5087 Pro Power

EMI Shield Heat Shrink Tubing Kit Description: EMI Shield Heat Shrink Tubing (2:1) combines two proven technologies into a single, easy to install product for adding EMI protection to wire and cable bundles. It is ideal for cables diameters of 1/2 and less. The product is comprised of MIL-I-23053/5 polyolefin heat-shrink tubing and an EMI shielding fabric woven of nickel-over-copper-plated polyester taffeta cloth which pro - vides outstanding shielding performance. This product is supplied in a one foot piece with three feet of 24AWG grounding wire and has a length tolerance of inch. Features: Easy one-step installation High performance Mil-Spec jacketing Excellent high frequency EMI shielding Government listed NSNs Lower total installed costs Specifications Material : Polyolefin Heat-Shrink Tubing, 2:1 shrink ratio Nickel-over-Copper-Plated Polyester Taffeta Cloth Fabric Shield Operating Temp. : -55C to 135C Thickness : 0.02 to 0.035 Break Strength : 1,500 (after shrinkage) Dielectric : 500V/mil (after shrinkage) Jacket, <0.1/sq conductive shield Flexibility : Medium Fluid Resist : Excellent Cable Types : Round Size : 3/16, 1/4, 3/8, 1/2, 3/4, 1 (before shrinkage) N/A Colour : Black www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 26/11/15 V1.3EMI Shield Heat Shrink Tubing Kit Attenuation Levels (dB) 10MHz 82 50MHz 68 100MHz 88 300MHz 83 500MHz 84 700MHz 90 1GHz 90 2GHz 90 5GHz 91 10GHz 81 20GHz 70 Kit Includes : 1ft of EMI Shield Heat Shrink Tubing and 3ft. 24AWG grounding wire Part Number Table Nominal Size Before Shrinkage Nominal Size After Shrinkage A B C D Description Part Number Inside Diameter Wall Thickness Inside Diameter Wall Thickness (Inches) (Inches) (Inches) (Inches) 0.187 0.093 0.02 SPC5086 0.25 0.125 SPC5087 0.375 0.188 0.025 SPC5088 EMI Shield Heat 0.01 Shrink Tubing Kit 0.5 0.25 SPC5089 0.75 0.375 0.03 SPC5090 1 0.5 0.035 SPC5091 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 26/11/15 V1.3