885053 EVB Qorvo

885053 1880 MHz BAW Filter Applications General purpose RF filter For Base Station Applications Wireless infrastructure 4G, Multi-standard Band 2 Uplink Repeaters SMP-12, 3.00 x 3.00 x 1.22 mm Product Features Functional Block Diagram Usable bandwidth 60 MHz 35 dB rejection at 1930 MHz 6 1 Gnd Gnd High attenuation Excellent power handling Low Loss Input Output 2 5 Single-ended operation No matching required for operation at 50 3 4 Gnd Gnd Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically sealed Pb RoHS compliant, Pb-free Pin Configuration - Single Ended General Description Pin No. Label 885053 is a general purpose Uplink filter for Band 2. 2 Input This filter was specifically designed in a 3x3mm 5 Output hermetic package for Base Station and Repeater applications and is part of our wide portfolio of RF 1.3,4,6 Ground filters in the same package. Low insertion loss, coupled with high attenuation and excellent power handling, makes this filter a natural Ordering Information choice for our customers Uplink RF filtering needs and other general purpose applications. Part No. Description 885053 Product description 885053-EVB Evaluation board description Standard T/R size = 5000 units/reel Data Sheet: Rev D 09-17-2014 - 1 of 6 - Disclaimer: Subject to change without notice 2014 TriQuint 885053 1880 MHz BAW Filter Absolute Maximum Ratings Parameter Rating 1. Operation of this device outside the parameter ranges given may cause permanent damage. Storage Temperature -40 to +125C (1) Operating Temperature -40 to +95C RF Input Power CW, +95C for 1000 hours +30 dBm CW, +95C for 2 hours +33 dBm (1) Electrical Specifications (2) Test conditions unless otherwise noted: Temp= -40C to +95C (3) (4) Parameter Conditions Min Typ Max Units Center Frequency - 1880.0 - MHz Maximum Insertion Loss 1850 1910 MHz - 2.0 2.8 dB (5) Amplitude Variation 1850 1910 MHz - 1.0 1.8 dB p-p 1850 1910 MHz 27 40 ns p-p - over any 5 MHz span (5) 1850 1910 MHz 9 15 ns p-p Group Delay Variation - over any 5 MHz span 1855 1905 MHz 7 12 ns p-p - 9 1475 MHz 30 41 - dB 1475 1570 MHz 35 47 - dB 1570 1725 MHz 40 44 - dB 1725 1755 MHz 35 40 - dB 1755 1805 MHz 30 35 - dB 1805 1830 MHz 20 34 - dB (6) Absolute Attenuation 1930 1935 MHz 35 45 - dB 1935 1990 MHz 45 50 - dB 1990 2170 MHz 30 50 - dB 2170 2700 MHz 15 35 - dB 2700 3800 MHz 10 25 - dB 3800 5000 MHz 5 20 - dB - 1850 1910 MHz Input VSWR - 1.9 2.5:1 - 1850 1910 MHz Output VSWR - 1.9 2.5:1 - (7) Source Impedance single-ended - 50 - (7) Load Impedance single-ended - 50 - Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 6. Relative to zero dB 7. This is the optimum impedance in order to achieve the performance shown Data Sheet: Rev D 09-17-2014 - 2 of 6 - Disclaimer: Subject to change without notice 2014 TriQuint