CMD263P3 5-11 GHz Low Noise Amplifier Product Overview The CMD263P3 is a broadband MMIC low noise amplifier housed in a leadless 3x3 mm plastic surface mount QFN package. The CMD263P3 is ideally suited for microwave radios and C and X-band applications where small size and low power consumption are needed. The broadband device delivers greater than 22 dB of gain with a corresponding output 1 dB compression point of +11 dBm and a noise figure of 1.4 dB. The CMD263P3 is a 50 ohm matched design eliminating the need for external DC blocks and RF Key Features port matching. Ultra Low Noise Figure Low Current Consumption Functional Block Diagram High Gain Broadband Performance Single Supply Voltage: +3.6 V 32 mA Pb-Free RoHs Compliant 3x3 QFN Package Ordering Information Part No. Description CMD263P3 100 pcs on 7 reel o Electrical Performance (V = 3.6 V, T = 25 C, F = 8 GHz) dd A ) Parameter Min Typ Max Units ) Frequency Range 5 - 11 GHz ) Gain 22 dB Noise Figure 1.4 dB ) Input Return Loss 17 dB Output Return Loss 13 dB Output P1dB 11 dBm Supply Current 32 mA Data Sheet November 4, 2021 Subject to change without notice 1 of 11 www.qorvo.com CMD263P3 5-11 GHz Low Noise Amplifier Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Drain Voltage, Vdd 5.0 V Vdd 2.0 3.6 4.5 V RF Input Power +20 dBm Idd 32 mA Channel Temperature, Tch 150C Electrical performance is measured at specific test conditions. Electrical specifications are not guaranteed over all recommended Power Dissipation, Pdiss 367 mW operating conditions. Thermal Resistance, Q 177 C/W JC Operating Temperature -40 to 85C Storage Temperature -55 to 150C Exceeding any one or combination of the maximum ratings may cause permanent damage to the device. o Electrical Specifications (Vdd = 3.6 V, TA = 25 C) Parameter Min Typ Max Min Typ Max Units ) Frequency Range 5 - 8.5 8.5 - 11 GHz ) Gain 19 22 26 19 22 26 dB ) Noise Figure 1.6 2.4 1.3 1.7 dB Input Return Loss 10 10 dB Output Return Loss 13 12 dB Output P1dB 11 11.5 dBm Output IP3 21 21 dBm Supply Current 22 32 42 22 32 42 mA Gain Temperature Coefficient 0.013 0.013 dB/C Noise Figure Temperature Coefficient 0.008 0.008 dB/C Data Sheet November 4, 2021 Subject to change without notice 2 of 11 www.qorvo.com