QPA3240 Qorvo

RFMD + TriQuint = Qorvo QPA3240 QPA3240 GaAs/GaN Power Doubler Hybrid 45MHz to 1218MHz The QPA3240 is a Hybrid Power Doubler amplifier module. The part Package: SOT-115J employs GaAs pHEMT die and GaN HEMT die, has extremely high output capability, and is operated from 45MHz to 1218MHz. It provides excellent linearity and superior return loss performance with Features low noise and optimal reliability. DC current of the device can be Excellent Linearity externally adjusted for optimum distortion performance versus power Superior Return Loss consumption over a wide range of output level. Performance Optimal Reliability Current setting V+ Low Noise Unconditionally Stable Under All Terminations 24.5dB Min. Gain at 1218MHz INPUT OUTPUT 480mA Max. Extra Pin For Current Adjustment Applications 45MHz to 1218MHz CATV Functional Block Diagram Amplifier Systems DOCSIS 3.1 Compliant Ordering Information QPA3240 Box with 50 pieces Revision DS20150922 - 1 of 7 - Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com QPA3240 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit RF Input Voltage (single tone) 75 dBmV DC Supply Over-Voltage (5 minutes) 30 V RFMD Green: RoHS status based on EU Storage Temperature -40 to +100 C Directive 2011/65/EU (at time of this Operating Mounting Base Temperature -30 to +100 C document revision), halogen free per EN 14582 : 2007, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Electrical Specifications Specification Parameter Unit Condition Min Typ Max General Performance. Test conditions unless otherwise noted: V+ = 24V TMB = 30C ZS = ZL = 75, IDC set >370mA Operating Frequency Range 45 1218 MHz Power Gain 23.3 23.8 24.3 dB f = 45MHz 24.5 24.8 26.0 dB f = 1218MHz Slope 1 0.5 1.0 2.0 dB f = 45MHz to 1218MHz Flatness of Frequency Response 0.8 dB f = 45MHz to 1218MHz Input Return Loss 20 dB f = 45MHz to 320MHz 19 dB f = 320MHz to 640MHz dB 18 f = 640MHz to 870MHz 18 dB f = 870MHz to 1000MHz 17 dB f = 1000MHz to 1218MHz Output Return Loss 20 dB f = 45MHz to 320MHz 19 dB f = 320MHz to 640MHz 18 dB f = 640MHz to 870MHz 18 dB f = 870MHz to 1000MHz dB 17 f = 1000MHz to 1218MHz Noise Figure 3.0 4.0 dB f = 50MHz to 1218MHz Total Current Consumption (DC) 470.0 480.0 mA Revision DS20150922 - 2 of 7 - Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com