QPC1217Q General Purpose DPDT Transfer Switch Product Description The QPC1217Q is a dual-pole double-throw transfer switch designed for general purpose switching applications where RF port transfer (port swapping) control is needed. The low insertion loss along with excellent linearity performance makes the QPC1217Q ideal for multi-mode GSM, EDGE, UMTS, LTE, V2X, and DSRC applications. The RF ports can be directly connected in 50 systems and control logic is compatible with 1.3V to 2.7V systems. The supply voltage is intended for connection to 2.8V systems but the device is operable from 2.6V to 5.5V. The 10 Pin 1.1 x 1.5 x 0.92 mm Package compact 1.1mm x 1.5mm size offers designers an easy-to-use switch component for quick integration into multimode, multi- band, multi-technology systems. Feature Overview Tested in accordance to AEC-Q100 Grade 2 Functional Block Diagram Low Insertion Loss High Port-to-Port Isolation GPIO Interface for 1.3V to 2.7V Control Logic Broadband Performance Suitable for All Cellular/WiFi/BT/V2X Operation up to 6GHz Very Low Current Consumption Linearity and Harmonic Performance Ideally Suited for LTE, V2X Applications DC blocking capacitors are not required in typical applications Applications V2X, DSRC, eCall, WiFi General purpose switching up to 6GHz Multi-Mode GSM, EDGE, WCDMA, and LTE Applications Ordering Information PART NO. DESCRIPTION QPC1217QSB 5-pc Sample Bag QPC1217QSR 100-pc Reel QPC1217QTR13-5K 5000-pc Reel QPC1217QPCK-01 Fully Assembled EVB + 5 piece SB QPC1217Q DS RevF Subject to change without notice 1 of 12 www.qorvo.com QPC1217Q General Purpose DPDT Transfer Switch Absolute Maximum Ratings PARAMETER RATING Storage Temperature -65 to +150C Ambient Operating Temperature -40 to +105C VDD 6.0 V CTL1 3.0 V Maximum Junction Temperature +125C Maximum Input Power <20MHz operation requires MPR of 1dB 36.0 dBm, 1:1 VSWR, +85C, 100% DC Single Drive 33.5 dBm, 1:1 VSWR, +105C, 100% DC 33.5 dBm, 1:1 VSWR, +85C, 100% DC Dual Drive 30.5 dBm, 1:1 VSWR, +105C, 100% DC Operation of this device outside the parameter ranges given above may cause permanent damage. Recommended Operating Conditions PARAMETER CONDITIONS MIN. TYP. MAX. UNITS V Supply Voltage 2.6 2.8 5.5 V DD V Supply Current 57 80 A DD C Logic Low Voltage 0.0 0.1 0.45 V TL CTL Logic High Voltage 1.3 1.8 2.7 V CTL Logic High Current 0.58 5 A Turn-On Time 50% Vdd to 10/90% RF 2.28 20 s Switching Speed 50% Control to 10/90% RF 1.42 3 s Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. www.qorvo.com QPC1217Q DS RevF Subject to change without notice 2 of 12