QPG6095 Zigbee / Thread / Bluetooth Low Energy Smart Home Communications Controller Product Brief Product Overview The QPG6095 Zigbee / Thread / Bluetooth Low Energy Smart Home Communications Controller provides a fully integrated solution for ultra-low power wireless communications for Smart Home sentroller devices such as thermostats, motion sensors, smart plugs, keypads and door/window sensors. It is compliant with the IEEE Standard 802.15.4 for Zigbee and 3 Thread, and the Bluetooth Core Specification v 5.0 for Bluetooth Low Energy, providing robust spread spectrum data communication with a highly secure encrypted and authenticated data flow. For Zigbee communications, antenna diversity offers additional robustness in a crowded wireless 2.4 GHz environment. The QPG6095 features a radio transceiver, integrated real-time Medium Access Control and Bluetooth Low Energy Controller, integrated Arm Cortex -M4 microprocessor, RAM and Flash memory, security engine, event scheduler, and an extensive set of peripherals including analog signal monitors and comparators. The QPG6095 integrated RF baluns and filters reduce the products RF design complexity enabling very low cost single layer applications using simple PCB antennas requiring no shielding and a minimum number of external components. The Flash memory allows for software upgrade over the air. The QPG6095 integrates full stack and applications for Zigbee 3.0 and Bluetooth Low Energy devices, as well as the OpenThread open-source implementation of the Thread networking protocols. Integrated multi-stack, multi-protocol support enables device vendors to operate multiple protocols on different channels, enabling innovative new applications combining Zigbee, Thread and Bluetooth Low Energy in one product. Advanced power management features ensure that power consumption is minimized in active as well as in standby states, enabling maintenance free and very small form factor products. For lower power consumption, the integrated DC/DC Buck converter can be used together with a few external components. Alternatively, the internal regulator can be used instead of the integrated DC/DC converter, to minimize the bill of material. Chip Overview 2 x DMA 3 x UART IEEE 802.15.4 Program Engine Memory Real-Time MAC Data SPI Ant.1 Flash Memory 2.4 GHz RAM 512 KB 2 Dynamic Multi- I C 64 KB IEEE 802.15.4 Protocol Support / Bluetooth LE Ant.2 2 I S Radio Bluetooth LE Real-Time Keyboard Arm G Scanner Link Layer Cortex-M4 P I IR O Generator AES-CCM Security Engine PDM Micro- Intelligent Sensor Hub phone I/F PWM Power Management Engine Timing & Control LED DC/DC Regulators Generator Converter ANIO Watchdog 32 MHz 32 KiHz (optional) (optional) GP P008 PB 11794 Version 1.04 Subject to change without notice. Page 1 of 3 www.qorvo.com Baluns and Filters Packet Input / Output Battery/Temp. Monitor ADC ComparatorQPG6095 Zigbee / Thread / Bluetooth Low Energy Smart Home Communications Controller converter can be used to further lower the power consumption Key Features in active mode, at the cost of two external components. Operates in the worldwide 2.4 GHz ISM-band Integrated baluns and RF filters General Characteristics Support for external LNA and/or PA IEEE 802.15.4 compliant PHY and Real-Time MAC Package QFN40, 6x6 mm o Preamble-based antenna diversity Operating Temperature -40 to +125 C o Packet-in-Packet resynchronization (industrial) o Multi-Stack / Multi-Channel support, operating in up to 3 Storage Temperature -50 to +150 C PANs on different channels 3 Bluetooth v 5.0 compliant LE Controller Soldering Temperature 260 C (10 s max) o High Date Rate (2 Mbits/s) Compliance RoHS HW-accelerated Dynamic Multi-Protocol support HW-accelerated AES and CCM* encryption with 128, 192 and 256-bit keys Electrical Characteristics Arm Cortex-M4 processor with DSP functionality 1 512 Kbyte Flash Program memory allows OTA software Standby Mode Currents upgrade Using internal RC oscillator 1.1 A 64 Kbyte Low Leakage Retention RAM Using 32KiHz crystal oscillator 1.2 A Full internal IO pull-up / pull-down support during active and (optional) standby states Using 32MHz crystal oscillator 760 A Fast and low-power analog measurements 1 Operational Currents (with / without DC/DC Converter) Low Cost Receive IEEE (single antenna) 4 / 5.7 mA The QPG6095 has 2 single-ended RF ports with integrated Receive IEEE (antenna diversity) 5.1 / 7.4 mA matching. No expensive shielding, chip antennas or voltage Receive Bluetooth 8.3 / 12.3 mA regulators are required to design a high performance Smart Home application. The integrated Arm Cortex-M4 processor Transmit (at 0 dBm) 11.2 / 16.7 mA and program memory allow for fully integrated, single chip Transmit (at 10 dBm) 23.6 / 35 mA applications. The integrated Real-Time MAC and Bluetooth LE Link Layer reduce software complexity and improve stability. Supply Voltage 1.8 to 3.6 V Interfaces and Peripherals Excellent Range and Reliability Programmable GPIO lines up to 30 The QPG6095 has been optimized for reliable communication Analog input lines up to 6 in harsh radio environments. The excellent receiver sensitivity and superior receiver signal processing allow extended Keyboard (HW assisted) max 8 x 8 coverage. Built-in IEEE 802.15.4 antenna diversity with two 8-bit PWM with fading support 4 outputs antennas improves the reliable link budget by 8 dB resulting in 16-bit PWM engine 6 outputs approximately 70% more reliable range compared to similar systems with only one antenna. In high density networks the UART interfaces 3 (one for debug) packet-in-packet resynchronization further improves the 2 SPI and I C Master and Slave peripheral interfaces communication reliability. The QPG6095 provides a flexible 2 I S Master interface for digital audio devices interface to an external FEM or PA to boost the output power. PDM Microphone Interface Ultra-Low Power Consumption High drive sink (for IR) The QPG6095s advanced integrated energy management 10/12-bit ADC to monitor the analog input lines, system allows it to operate from a standard lithium coin cell the power supply level and the temperature battery, like the CR2032, as well as from intermittent power supplies like photovoltaic (solar), with a minimum of additional Low power comparator components. It includes ultra-low power voltage level detectors High speed programming interface and overvoltage protection circuitry, allowing safe operation Crystal Frequency 32.000 MHz (40 ppm) and graceful shutdown. The battery lifetime monitor tracks the usage of the battery and provides an early exhaustion warning. Optional 32.768 kHz The intelligent sensor hub allows for quick and low power measurements during standby. The integrated DC/DC Buck GP P008 PB 11794 Version 1.04 Subject to change without notice. Page 2 of 3 www.qorvo.com