RFSW6062 RFSW6062 Low Insertion High Isolation SP6T Switch 5MHz to 6000MHz Package: QFN, 14-pin, 2mm x 2mm The RFSW6062 is a low loss, high isolation SP6T switch with Features performance optimized for use in Cellular BTS applications. Plus it 5MHz to 6000MHz Operation is also ideally suited for use in CATV and SATV applications. This Excellent Insertion Loss and part is packaged in a compact 2mm x 2mm, 14-pin, QFN package Isolation Performance which allows for a small solution size with no need for external DC Low Insertion Loss: 0.53dB at blocking capacitors (when no external DC is applied to the device 2GHz ports). High Isolation: 27dB at 2GHz High IP3: >70dBm at 2GHz Compatible with Low Voltage Logic (V Minimum = 1.3V) HIGH RFSW6062 No External DC Blocking RF1 Capacitors Required on RF Paths if DC is Applied RF2 Externally RF3 2000V HBM ESD Rating on All ANT Ports RF4 3V to 5V Operation RF5 RF6 Applications Cellular BTS CATV, SATV Applications VDD CTL1CTL2 CTL3 Test Equipment Functional Block Diagram General Purpose Switch Ordering Information RFSW6062SQ Sample bag with 25 pieces RFSW6062SR 7 Reel with 100 pieces RFSW6062TR7 7 Reel with 2500 pieces RFSW6062PCK-410 5MHz to 3GHz PCBA with 5-piece sample bag RFSW6062PCK-411 3GHz to 6GHz PCBA with 5-piece sample bag RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, 1 of 13 trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc. Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Control Voltage (V ) 3.0 V CTL Supply Voltage (V ) 6.0 V DD RFMD Green: RoHS status based on EU 32 dBm Maximum CW Input Power for V = 3V DD Directive 2011/65/EU (at time of this document revision), halogen free per IEC Max Input Power During Active Switching 24 dBm 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials Storage Temperature Range -40 to +150 C and red phosphorus as a flame retardant, ESD Rating - Human Body Model (HBM) 2000 V and <2% antimony in solder. Moisture Sensitivity Level MSL2 Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Note Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Specification Parameter Unit Min Typ Max Operating Temperature Range -40 +85 C 3 5 5.5 V V Switch Supply Voltage DD Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max General Performance Electrical Specifications, TA=25C, V =3V to 5V DD Operating Frequency Range 5 6000 MHz 0.4 0.45 dB 925MHz 0.53 0.6 dB 1990MHz Insertion Loss2 (RFC to RF1/RF2/ RF3/RF4/RF5/RF6) 0.68 0.78 dB 2650MHz 1.85 dB 5850MHz 31 40 dB 925MHz 22 29 dB 1990MHz Isolation (RFC to RF1/RF2/RF3 / RF4RF5/RF6) 19 25 dB 2650MHz 13.5 dB 5850MHz 31 40 dB 925MHz 18 27 dB 1990MHz Isolation (RF1 to RF2/RF3/RF4/ RF5/RF6) 18 23 dB 2650MHz 13.5 dB 5850MHz Return Loss (On State) 24 dB 5MHz ~ 3GHz 3GHz ~ 6GHz Return Loss (On State) 11 dB 824MHz Second Harmonic -105 -88 dBc Pin = 28dBm RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, 2 of 13 trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc.