RFSW8001 11b/g/n/ac WiFi SP3T Switch RFSW8001 Package: DFN, 8-pin, The RFSW8001 is a single pole triple throw (SP3T) SOI switch in 1.5mm x 1.5mm x 0.45mm a 1.5mm x 1.5mm x 0.45mm, Pb-Free, 8-pin package. This switch is capable of switching between WiFi Rx, WiFi Tx, and Bluetooth Features Rx/Tx operations. The RFSW8001 can also be placed in WiFi and Symmetric SP3T Switch Bluetooth modes simultaneously, along with other branch Switch Control Voltage 1.2V to 4.8V simultaneous modes (including all three branches), with a slight Low Insertion Loss 0.6dB (2.4GHz) increase in insertion loss. This device meets or exceeds the RF Isolation: 27dB (2.4GHz) switch needs of IEEE802.11b/g/n/ac WiFi RF systems. P0.1dB: 27dBm (3.6V) Applications IEEE802.11b/g/n/ac WiFi 1 8 RF2 VDD Applications WiFi/Bluetooth Combination Devices 2 7 CRF2 ANT GMSK, QPSK, DQPSK, QAM Modulation CRF1 3 6 CRF3 High Performance Communication Systems RF1 4 5 RF3 Wireless Backhaul WiBro, WiMAX, LTE Simultaneous modes for 3 branch Functional Block Diagram operation Ordering Information RFSW8001SQ Standard 25 piece bag RFSW8001SR Standard 100 piece bag RFSW8001TR7 Standard 2500 piece reel RFSW8001PCK-410 Fully assembled evaluation board w/5 piece bag RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS160219 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, 1 of 6 trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc. RFSW8001 Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Supply Voltage 5.0 V ESD Human Body Model (HBM) 2000 V RFMD Green: RoHS status based on EU ESD Charged Device Model (CDM) 1000 V Directive 2011/65/EU (at time of this document revision), halogen free per IEC Operating Case Temperature -40 to +85 C 61249-2-21, < 1000ppm each of antimony Storage Temperature -40 to +150 C trioxide in polymeric materials and red phosphorus as a flame retardant, and Moisture Sensitivity Level MSL2 <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max Operating Parameters Frequency 100 4000 MHz VDD 2.7 3.6 4.8 V Switch Control Voltage: Low 0 0.20 V Switch Control Voltage: High 1.2 4.8 V V = 3.6V CRF1 = 1.2V to 4.8V T = -40C to 85C DD RF1 ANT 2412MHz to 2484MHz Unless otherwise noted Insertion Loss 0.5 dB T = 25C 0.5 1 dB Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF1 to RF2 Isolation 24 27 dB Measured ANT - RF2 26 29 dB Measured RF2 - RF1 RF1 to RF3 Isolation 27 30 dB Measured ANT RF3 29 32 dB Measured RF1 - RF3 V = 3.6V CRF2 = 1.2V to 4.8V T = -40C to 85C DD RF2 ANT 2412MHz to 2484MHz Unless otherwise noted Insertion Loss 0.5 dB T = 25C 0.5 1 dB Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF2 to RF1 Isolation 25 28 dB Measured ANT - RF1 29 32 dB Measured RF2 RF1 RF2 to RF3 Isolation 28 31 dB Measured ANT - RF3 28 31 dB Measured RF2 to RF3 R F Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS160219 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. RFM) for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 6