RFSW1012 Broadband SPDT Switch Product Overview The RFSW1012 is a single-pole double-throw (SPDT) switch designed for applications requiring very low insertion loss and high power handling capability. The excellent linearity performance of the RFSW1012 makes it ideal for use in LTE, WCDMA, and CDMA applications. This switch is ideally suited for use in CATV and SATV applications. The RFSW1012 is packaged in a compact 2mm X 2mm, Key Features 12-pin, QFN package. 5MHz to 6000MHz Operation 50 or 75 Applications Low Insertion Loss: 0.30dB at 1980MHz High Isolation: 37dB at 2GHz High IP3: >75dBm at 2GHz Functional Block Diagram Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) No External DC Blocking Capacitors Required on RF Paths Unless DC is Applied Externally 12 11 10 2000V HBM ESD Rating on All Ports CTB/CSO: >100dBc (41dBmV/ch., 137 Channels) GND 1 9 VDD EN RFC 2 8 GND 3 7 CTRL Applications LTE, WCDMA, GSM 4 6 5 CATV, SATV Applications Post PA Switching Top View General Purpose Switching Applications Ordering Information Part No. Description RFSW1012SR 7 Sample reel with 100 pieces RFSW1012TR13 13 Reel with 2500 pieces RFSW1012PCK-411 50 PCBA with 5-piece sample bag RFSW1012PCK-410 75 PCBA with 5-piece sample bag Data Sheet, July 18, 2018 Subject to change without notice 1 of 11 www.qorvo.com GND GND RF2 RF1 GND GND RFSW1012 Broadband SPDT Switch Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature -50 to 150C V +2.7 +5 +5.5 V DD V +6 V DD T 40 +90 C CASE V , V +3 V 6 EN CTRL Tj at MTTF>10 hrs 125 C Hot-Switching Max Pin (50 load) 20 dBm Electrical specifications are measured at specified test +31dBm(5-25MHz) conditions. Specifications are not guaranteed over all +34dBm (25-500MHz) Pin max (CW) recommended operating conditions. +37dBm (>500MHz) +36dBm (>500MHz, 6:1VSWR) Pin max (LTE, 9dB PAR, 1%, 105C) +32dBm (700-6000MHz, 2:1VSWR) Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications 50 System Test conditions, unless otherwise noted: Temp = 25C, VDD = +3 V. All RF ports terminated in 50. Parameter Conditions Min Typ Max Units Operational Frequency Range 5 6000 MHz 915MHz 0.25 0.45 dB 1980MHz 0.30 0.51 dB Insertion Loss 2650MHz 0.40 dB 5850MHz 0.45 dB 915MHz 38 45 dB 1980MHz 33 37 dB Isolation, RFC-RFX 2650MHz 29 33 dB 5850MHz 21 dB 915MHz 37 42 dB 1980MHz 30 35 dB Isolation (RF1-RF2) 2650MHz 28 32 dB 5850MHz 21 dB Return Loss (On-State) >15 dB Input IP3 2.2GHz, 24dBm per tone, 1MHz tone spacing 75 dBm Tone 1: 836.5MHz at +26dBm Tone 2: 1718MHz at -20dBm, 129 dBm Rx freq: 881.5MHz Input IP2 Tone 1: 1880MHz at +26dBm Tone 2: 3840MHz at -20dBm, 129 dBm Rx freq: 1960MHz 5-25 MHz, 50 load 30 dBm Max Operating Pin 25-500 MHz, 50 load 33 dBm >500 MHz, 50 load 36 dBm P0.1dB >100 MHz 41 dBm 900 MHz -95 -75 dBc Second Harmonic 1800 MHz -95 -75 dBc 900 MHz -90 -75 dBc Third Harmonic 1800 MHz -90 -75 dBc >5MHz, all ports terminated, no RF inputs <-105 dBm Spurious Output <5MHz, all ports terminated, no RF inputs <-100 dBm <400 MHz, 50 load 34 dBm Max Input Power >400MHz, 50 load 36 dBm Device Voltage, V 2.7 3 4.6 V DD V = High 100 200 A EN Leakage Current, I DD V = Low 14 20 A EN Logic High 1.3 1.8 2.7 V Control Voltage (V , V ) EN CTRL Logic Low 0 0.45 V V = High, V = High 2.5 5 A CTRL EN Control Current V = Low, V = High 1 3 A CTRL EN Switching Speed 50% Control to 10%/90% RF 2 5 s Data Sheet, July 18, 2018 Subject to change without notice 2 of 11 www.qorvo.com