RFSW6042 RFSW6042 Low Insertion High Isolation SP4T Switch 5MHz to 6000MHz Package: QFN, 12-pin, 1.8mm x 1.8mm The RFSW6042 is a low loss, high isolation SP4T switch with Features performance optimized for use in Cellular BTS applications. Plus it 5MHz to 6000MHz Operation is also ideally suited for use in CATV and SATV applications. This Low Insertion Loss: 0.45dB at part is packaged in a compact 1.8mm x 1.8mm, 12-pin, QFN 2GHz package which allows for a small solution size with no need for High Isolation: 34dB at 2GHz external DC blocking capacitors (when no external DC is applied High IP3: >70dBm at 2GHz to the device ports). Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) No External DC Blocking Capacitors Required on RF Paths if DC is Applied Externally 12 11 10 9 2000V HBM ESD Rating on All Ports 8 GND C2 1 3V to 5V Operation Applications 2 7 C1 ANT Cellular BTS CATV, SATV Applications 3 4 5 6 Test Equipment General Purpose Switch Functional Block Diagram Ordering Information RFSW6042SQ Sample bag with 25 pieces RFSW6042SR 7 Reel with 100 pieces RFSW6042TR7 7 Reel with 2500 pieces RFSW6042PCK-410 5MHz to 3GHz PCBA with 5-piece sample bag RFSW6042PCK-411 3GHz to 6GHz PCB with 5-piece sample bag Revision DS20151009 - 1 of 12 - Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com Control Block GND VDD RF4 RF2 GND GND RF3 RF1 RFSW6042 Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Control Voltage (V ) 3.0 V CTL Supply Voltage (V ) 6.0 V DD RFMD Green: RoHS status based on EU 35 dBm Maximum CW Input Power for VDD = 3V Directive 2011/65/EU (at time of this document revision), halogen free per IEC Storage Temperature Range -40 to +150 C 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials ESD Rating - Human Body Model (HBM) 2000 V and red phosphorus as a flame retardant, Moisture Sensitivity Level MSL2 and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Specification Parameter Unit Min Typ Max Operating Temperature Range -40 +85 C V Switch Supply Voltage 3 5 5.5 V DD Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max General Performance Electrical Specifications, TA=25C, VDD=5V Operating Frequency Range 5 6000 MHz 0.32 0.5 dB 925MHz 0.45 0.6 dB 1990MHz Insertion Loss (RFC to RF1/RF2/ RF3/RF4) 0.45 dB 2650MHz 1.25 dB 5850MHz 36 dB 925MHz 28 dB 1990MHz Isolation (RFC to RF1/RF2/RF3 / RF4) 25 dB 2650MHz 17 dB 5850MHz 35 43 dB 925MHz 27 34 dB 1990MHz Isolation (RF1 to RF2/RF3/RF4) 30 dB 2650MHz 15 dB 5850MHz 5MHz ~ 3GHz Return Loss (On State) -15 dB Return Loss (On State) -12 dB 3GHz ~ 6GHz 900MHz Second Harmonic -108 -95 dBc Pin = 28dBm Revision DS20151009 - 2 of 12 - Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com