RFSW8006Q RFSW8006Q 11b/g/n/ac WiFi SP3T Switch In process of AEC-Q100 Qualification Package: DFN, 8-pin, 2.0mm x 2.0mm x 0.85mm The RFSW8006Q is a single pole triple throw (SP3T) SOI switch in a 2x2mm, Pb-Free, 8-pin package. This switch is capable of Features switching between WiFi Rx, WiFi Tx, and Bluetooth Rx/Tx Symmetric SP3T Switch operations. The RFSW8006Q can also be placed in WiFi and Switch Control Voltage 1.2V to 4.8V Bluetooth modes simultaneously with a slight increase in insertion Low Insertion Loss 0.6dB (2.4GHz) loss. This device meets or exceeds the RF switch needs of IEEE802.11b/g/n/ac WiFi RF systems. Isolation: 27dB (2.4GHz) P0.1dB: 27dBm (3.6V) Applications Automotive WiFi 1 8 RF2 VDD Automotive Data and Diagnostics Infotainment 2 7 CRF2 ANT Key Fob IEEE802.11b/g/n/ac WiFi CRF1 3 6 CRF3 Applications RF1 4 5 RF3 Functional Block Diagram Ordering Information RFSW8006QSQ Standard 25 piece bag RFSW8006QSR Standard 100 piece bag RFSW8006QTR7 Standard 2500 piece reel RFSW8006QPCK-410 Fully assembled evaluation board w/5 piece bag RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150129 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. 2013, RF Micro Devices, Inc. 1 of 6 RFSW8006Q Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Supply Voltage 5 V ESD Human Body Model (HBM) 2000 V RFMD Green: RoHS status based on EU ESD Charged Device Model (CDM) 1000 V Directive 2011/65/EU (at time of this document revision), halogen free per IEC Operating Case Temperature -40 to +105 C 61249-2-21, < 1000ppm each of antimony Storage Temperature -40 to +150 C trioxide in polymeric materials and red phosphorus as a flame retardant, and Moisture Sensitivity Level MSL2 <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max Operating Parameters Operating Frequency Range 100 4000 MHz VDD 2.7 3.6 4.8 V Switch Control Voltage: Low 0 0.20 V Switch Control Voltage: High 1.2 4.8 V V = 3.6V CRF1 = 1.2V to 4.8V T = -40C to 105C DD RF1 ANT 2412MHz to 2484MHz Unless otherwise noted Insertion Loss 0.5 dB T = 25C 0.6 1.2 dB All conditions Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF1 to RF2 Isolation 25 30 dB Measured ANT - RF2 RF1 to RF3 Isolation 25 30 dB Measured ANT RF3 V = 3.6V CRF2 = 1.2V to 4.8V T = -40C to 85C DD RF2 ANT 2412MHz to 2484MHz Unless otherwise noted Insertion Loss 0.6 dB T = 25C 0.6 1.2 dB T = 105C Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF2 to RF1 Isolation 23 25 dB Measured ANT - RF1 RF2 to RF3 Isolation 28 31 dB Measured ANT - RF3 V = 3.6V CRF3 = 1.2V to 4.8V T = -40C to 85C DD RF3 ANT 2412MHz to 2484MHz Unless otherwise noted Insertion Loss 0.6 dB T = 25C 0.6 1.2 dB T = 105C Input Return Loss 20 15 dB Output Return Loss 20 15 dB RF3 to RF1 Isolation 23 26 dB Measured ANT RF1 RF3 to RF2 Isolation 27 31 dB Measured ANT RF2 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150129 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice rfmd.com. The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. RFM) for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 6