QPC6742SR Qorvo

QPC6742 75 SP4T Switch 5MHz to 2000MHz Product Overview The QPC6742 is a 75 Silicon on Insulator (SOI) single-pole, four throw (SP4T) switch designed for use in CATV, satellite set top, and other high-performance communications systems. It offers a high isolation symmetric topology with excellent linearity and power handling capability. No blocking caps are necessary on the RF ports. QPC6742 is packaged in a convenient 1.8mm x 12 Pin 1.8x1.8mm QFN Package 1.8mm QFN package Key Features 5MHz to 2000MHz Operation 5MHz to 3300MHz Operation with Additional Matching Low Insertion Loss: 0.35dB at 800MHz Functional Block Diagram No Blocking Caps Required Unless Voltage on RF Line High Isolation: 42dB at 800MHz High Input IP3: 82dBm at 850MHz 2kV ESD +1.8V Logic Compatible 3V to 5V Operation Applications MDU Amplifiers Point To Point Optical Nodes Set Top Box Top View PCTV Multi-tuner DVR Ordering Information Part No. Description QPC6742SQ Sample bag with 25 pieces QPC6742SR 7 Reel with 100 pieces QPC6742TR7 7 Reel with 2500 pieces QPC6742PCK 52000MHz PCBA with 5 pc. sample bag Data Sheet Rev.D, March 17, 2021 - 1 of 22 - www.qorvo.com Subject to change without notice All rights reserved QPC6742 75 SP4T Switch 5MHz to 2000MHz Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Control Voltage (V ) +3.0V Supply Voltage, V +2.7 +3 +5.5 V C1, C2 DD Supply Voltage (V ) +6.0V Temperature Range 40 +85 C DD Electrical specifications are measured at specified test conditions. Maximum CW Input Power at 25C +35dBm Specifications are not guaranteed over all recommended operating conditions. Max Input Power During Active Switching +27dBm Storage Temperature Range 40 to +150C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications QPC6742-4000B EVB (1) Parameter Conditions Min Typ Max Units Frequency Range 5 2000 MHz 5MHz 0.20 50MHz 0.30 Insertion Loss 800MHz 0.35 dB (RFC to RF1/RF2/RF3/RF4) 1.2GHz 0.40 2GHz 0.45 5MHz 40 50MHz 45 (2) Return Loss 800MHz 30 dB (RFC, RFx) 1.2GHz 30 2GHz 30 5MHz 75 50MHz 62 (3) Isolation 800MHz 42 dB (RFC to RF1/RF2/RF3/RF4) 1.2GHz 38 2GHz 31 5MHz 80 (3) 50MHz 65 Isolation (RF1/RF2/RF3/RF4) 800MHz 43 dB 1.2GHz 39 2GHz 34 Notes: 1. Test Conditions Unless Otherwise Specified: TA = +25C, VDD = +3.0V, VC1,C2 = 0/+2.5V, 75 system. 2. Includes series matching. Refer to EVB Schematic on page 5. 3. Average Isolation. Refer to Performance Plots on pg.8 for more detail. Data Sheet Rev.D, March 17, 2021 - 2 of 22 - www.qorvo.com Subject to change without notice All rights reserved