RFSW6032 RFSW6032 Low Insertion High Isolation SP3T Switch 5MHz to 6000MHz Package: QFN, 12-pin, 1.8mm x 1.8mm The RFSW6032 is a low loss, high isolation SP3T switch with Features performance optimized for use in Cellular BTS applications. It is 5MHz to 6000MHz Operation also ideally suited for use in CATV and SATV applications. This Excellent Insertion Loss and part is packaged in a compact 1.8mm x 1.8mm, 12-pin, QFN Isolation Performance package which allows for a small solution size with no need for Low Insertion Loss: 0.45dB at external DC blocking capacitors (when no external DC is applied 2GHz to the device ports). High Isolation: 37dBm at 2GHz High IP3: >70dBm at 2GHz Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) No External DC Blocking 12 11 10 9 Capacitors Required on RF Paths if DC is Applied Externally C2 1 8 GND 2000V HBM ESD Rating on All Ports 3V to 5V Operation C1 2 7 ANT Applications 3 4 5 6 Cellular BTS CATV and SATV Applications Functional Block Diagram Test Equipment General Purpose Switching Ordering Information RFSW6032SQ Sample bag with 25 pieces RFSW6032SR 7 Reel with 100 pieces RFSW6032TR7 7 Reel with 2500 pieces RFSW6032PCK-410 5MHz to 6GHz PCBA with 5-piece sample bag Revision DS20151013 - 1 of 9- Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com Control Block GND VDD NC RF2 GND GND RF3 RF1 RFSW6032 Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Control Voltage (V ) 3.0 V CTL Supply Voltage (V ) 6.0 V DD RFMD Green: RoHS status based on EU Maximum CW Input Power for VDD = 3V 35 dBm Directive 2011/65/EU (at time of this document revision), halogen free per IEC Max Input Power During Active Switching 27 dBm 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials Storage Temperature Range -40 to +150 C and red phosphorus as a flame retardant, ESD Rating - Human Body Model (HBM) 2000 V and <2% antimony in solder. Moisture Sensitivity Level MSL2 Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Specification Parameter Unit Min Typ Max Operating Temperature Range -40 +85 C V Switch Supply Voltage 3 5 5.5 V DD Nominal Operating Parameters Specification Parameter Unit Condition Min Typ Max General Performance Electrical Specifications, TA = 25C, V = 3V to 5V DD Operating Frequency Range 5 6000 MHz 0.35 0.45 dB 925MHz 0.45 0.6 dB 1990MHz Insertion Loss (RFC to RF1/RF2/RF3) 0.5 0.7 dB 2650MHz 1.2 dB 5850MHz Isolation (RFC to RF1/RF2/RF3) 36 dB 925MHz 29 dB 1990MHz 26 dB 2650MHz 15 dB 5850MHz Isolation (RF1 to RF2/RF3) 35 40 dB 925MHz 30 37 dB 1990MHz 32 dB 2650MHz 19 dB 5850MHz 5MHz ~ 3GHz 23 dB Return Loss (RF1/RF2 On-state) 3GHz ~ 6GHz 14 dB 900MHz Second Harmonic -107 -85 dBc Pin = 28dBm Revision DS20151013 - 2 of 9- Disclaimer: Subject to change without notice 2015 RF Micro Devices, Inc. www.rfmd.com / www.qorvo.com