TGL2217-SM 0.120 GHz 10 Watt VPIN Limiter Product Overview Qorvos TGL2217-SM is a packaged high power, wideband GaAs VPIN limiter capable of protecting sensitive receive channel components against high power incident signals. The TGL2217-SM does not require DC bias and achieves a low insertion loss all in a small form factor. These features allow for simple integration with minimal impact to system performance. The TGL2217-SM operates from 0.120.0 GHz with low 14 Pad 3.5x3.5mm Air Cavity QFN Package insertion loss of less than 0.9 dB. Receive protection is rated up to 10 W incident pulsed power with a low flat leakage of less than 18.5 dBm. Key Features The TGL2217-SM is offered in a small 3.5 x 3.5 mm QFN Frequency Range: 0.1 to 20.0 GHz package for simple board level assembly. Fully matched to Insertion Loss: < 0.9 dB 50 ohms on both RF ports, it is well suited for both Peak Power Handling: 10 W (pulsed) commercial and defense related applications. Flat Leakage: < 18.5 dBm Lead-free and RoHS compliant. Spike Leakage < 20.5 dBm Recovery Time < 40 nS Passive (no DC bias required) QFN Package Dimensions: 3.50 x 3.50 x 1.715 mm Performance is typical across frequency. Please reference electrical specification table and data plots for Functional Block Diagram more details. Applications Receive Chain Protection Commercial and Military Radar Electronic Warfare Communications Ordering Information Part Description Top View TGL2217-SM 0.120.0 GHz 10W VPIN Limiter 0.120.0 GHz 10W VPIN Limiter TGL2217-SMEVB01 Evaluation Board Data Sheet Rev. F, June 2020 Subject to change without notice 1 of 9 www.qorvo.com TGL2217-SM 0.120 GHz 10 Watt VPIN Limiter Absolute Maximum Ratings Recommended Operating Conditions Parameter Min Typ Max Units Parameter Rating Operating Temperature Range -40 +25 +85 C Incident Power, Pulsed, 50 , 85 C 40 dBm Passive No Bias Incident Power, CW, 50 , 25 C 36 dBm Electrical specifications are measured at specified test conditions. 33 dBm Incident Power, CW, 50 , 85 C Specifications are not guaranteed over all recommended operating Mounting Temperature conditions. 260 C (30 s max) Storage Temperature -40 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Test conditions, unless otherwise noted: 25 C (1) Parameter Conditions Min Typ Max Units Operational Frequency Range GHz 0.1 20.0 0.5 GHz 0.08 0.3 5 GHz 0.27 0.5 Insertion Loss 10 GHz 0.45 0.8 dB 15 GHz 0.64 1.1 20 GHz 0.83 1.2 0.5 GHz 39 5 GHz 26 Input Return Loss 10 GHz 24 dB 15GHz 19 17 20 GHz 0.5 GHz 40 5 GHz 26 Output Return Loss 10 GHz dB 27 15 GHz 18 17 20 GHz 2 GHz 16.7 Flat Leakage Power at P > 30 dBm, (CW) 10 GHz dBm IN 17.7 18 GHz 16.9 Pulse Recovery Time < 40 nS Spike Leakage 20.5 dBm Insertion Loss Temperature Coefficient 0.002 dB/ C Thermal and Reliability Information Parameter Test Conditions Value Units (1) Frequency = 10 GHz, Incident Power 10 W (RF Operational Life Test) RF Pulsed, PW=100 s, DC=10%, 50 , 25C Notes: 1. Test terminated after 168 hours. Insertion Loss remained 1 dB for device under test. Data Sheet Rev. F, June 2020 Subject to change without notice 2 of 9 www.qorvo.com