High Output Voltage Features Universal AC Input LIGHTLINE Constant Current Operation LED DRIVER AC/DC-Converter Active Power Factor Correction IP67 Design for Indoor and Outdoor Use with 5 year Warranty Compact Size Digital PWM and Analogue Voltage Dimming Selection Guide Part Nominal Rated Output Voltage Rated Efficiency Number Voltage Voltage Range Current typ. (VAC) (V) (VDC) (mA) (%) 100 Watt RACD100-700A 100-277 142 100-142 700 91 12-18 230 500 21-39 Triac 82 Single RACD100-1400A 100-277 71 50-71 1400 91 Output Specifications (measured at 240V AC and 25C ambient temperature) 2/Input Voltage Range 90-305 VAC or 127-430VDC Input Frequency Range 47-63Hz Power Factor Full Load, 115VAC >0.98 Full Load, 230VAC >0.94 70% Load >0.90 DC Dimming Open = 100% DC 1-10V PWM Dimming Open = 100% Duty 10% - 100% Freq. 500Hz - 3000Hz RoHS 2011/65/EU Voltage Hi=10V, Low=0V 6/6 E340696 THD Full Load, 115VAC 8% max. UL 8750 Certified Full Load, 230VAC 15% max. EN 61347 Certified Full Load, 277VAC 17% max. AC Current 115VAC 1.2A max. 230VAC 0.6A max. Input/Output Isolation 3.75kVAC / 1minute RACD100-A Input/Case Isolation 1.8kVAC / 1minute Output/Case Isolation 0.5kVAC / 1minute Leakage Current 230VAC <0.75mA Inrush Current 230VAC 50A (Class C Circuit Breaker is recommended) Voltage Tolerance -1% to 5% Derating-Graph Current Tolerance 5% (Ambient Temperature) Start-up Time ( Full Load) 230VAC 2s Ripple & Noise 142V Version 1000mV max. ( 20MHz bandwidth) 71V Version 500mV max. A * 2 Over Voltage 110 - 140% Rated Voltage Shutdown Mode 2 . A Short Circuit Protection Hiccup Mode Over Temperature Protection 100C 10C - A Operation Temperature without derating -30C to +55C (see graph) , A Operation Humidity 20%-90% RH Non-Condensing Storage Temperature -40C to +80C A Storage Humidity 10%-95% RH Vibration 10-500Hz, 2G, 60 Min. along X, Y and Z 0* 0 * + / ++ IP Rating IP67 ) Safety Standards UL/cUL LED Lighting Safety UL8750 CE LVD Directive, Safety EN61347-2-13 CB Report: 1103631 001 IEC61347-2-13 continued on next page Refer to Application Notes L-62 REV: 0/2015 www.recom-power.com NOT RECOMMENDED FOR NEW DESIGNSRACD100-A RACD100-A LIGHTLINE AC/DC-Converter Series Specifications (measured at 240V AC and 25C ambient temperature) EMC Standards EMC Compatibility EN55015 FCC, Part 15 Harmonic Current EN61000-3-2 Class C EN61000-3-3 EMC Immunity EN61000-4-2, 3, 4, 5, 6, 11 EN61547 Dimension 177*57*37mm Weight 750g Design Lifetime 70 x 10 hours max. MTBF using MIL-HDBK-217F (25C) 200 x 10 hours min. Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Derating Curves :: ( ( A B + A A . A . A A A - A - A , A , A A A A A 3 * . , * + ,* - / . 3 + A A 8 2 2) - A 9 G 7 5 G B 2H 5 B 2 ( > H > 7 7 < I ( G + 0 *E Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 7 12 14 18 90 phase angle B 6 10 12 14 230VAC, 1Ohm 90 phase angle C 13 22 24 31 B 7 11 14 17 277VAC, 1Ohm 90 phase angle C 15 25 29 36 Package Style and Pinning %+ //% +%* +% -%/ +/% * * ( , % 12 7 02 4 (> * %- 1 4 ) 6 4 5 0 ) 69 4 .) & 6= 5 .. */% The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-63