20W Class II AC-DC LED Power Supply Features 350mA, 500mA, 700mA, 1050mA Output LIGHTLINE Universal AC Input (90-305VAC) AC/DC-Converter LED DRIVER Active Power Factor Correction Isolation Voltage 3.75kVAC with 5 year Warranty Efficiency to 80% ENEC, UL, RCM and CB Certified Low Cost Selection Guide Part Input Output Output Efficiency Number Range Current Voltage 20 Watt PFC (VAC) (mA) (VDC) (typ.) RACD20-350/277 90 - 305 350 28 - 57 80% Single RACD20-500/277 90 - 305 500 20 - 40 80% RACD20-700/277 90 - 305 700 14 - 29 80% Output RACD20-1050/277 90 - 305 1050 10.8 - 19 80% Specifications Input Voltage Range 90-305VAC or 130-430VDC Output Power Range other types 10 Watts min., 20 Watts max. 1050mA Version 12 Watts min., 20 Watts max. Input Frequency Range 50/60 Hz typ. Power Factor Full Load, 115VAC >0.90 Full Load, 230VAC >0.90 Full Load, 277VAC >0.85 RoHS 2011/65/EU E340696 6/6 THD Full Load, 115VAC/230VAC/277VAC 14% max. Open Circuit Voltage 350mA Version 59 VDC UL 8750 Certified 500mA Version 44 VDC ENEC 61347 Certified 700mA Version 33 VDC 1050mA Version 23 VDC Input / Output Isolation 3750 VAC / 1 minute RACD20/277 Operating Frequency 50/60 Hz Overload Protection 105% ~ 110% Weight 195g Derating-Graph Dimension Drawing 80 x 74 x 26.5mm THD <20% (Ambient Temperature) Temperature Coefficient according to standards A Operating Temperature Range Ambient Temperature -20C to +50C (free air convection, according to CE/UL) Case Temperature 80C max A Operating Temperature Range Ambient Temperature -20C to +50C (free air convection, according to ENEC) Case Temperature 85C max. - A : ) Storage Temperature -40C to +80C , A Acoustic Noise 30dB (10cm) IP Rating IP66 A Certifications A ENEC CE Certification, General Safety EN61347-2-13 0 , - + LED Lighting Safety (E340696) UL1310 Class B, UL8750 RCM (21378) AS/NZS 61347.1:2002, IEC 61347-2-13 Note: Harmonics EN61000-3-2 Class C All LED Drivers may not be used without a load. EMC EN55015 Class B They must be switched on the primary side only. FCC Part 18 Class B Noncompliance may damage the LED or reduce its lifetime. PSE J61347-1(H20), J61347-2-13(H21), J55015(H20) Design Lifetime 50 x 10 hours Refer to Application Notes www.recom-power.com REV: 0/2015 L-29 5 A RACD20/277 LIGHTLINE AC/DC-Converter Series Standard Application Circuit +2) 7) 0&&&6 // * 2) //2) Notes: LED power supply is internally fused. No external fuse is required. Do not connect or disconnect LED load while the converter is on. This may damage the LED or reduce its life. Class 2 Power supply Characteristic Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 47 68 84 105 90 phase angle B 36 57 69 85 230VAC, 1Ohm 90 phase angle C 57 87 109 134 B 41 65 80 98 277VAC, 1Ohm 90 phase angle C 65 99 125 154 Standard Package Style & Pinning -%+ Wire Connections Wire Function , C+ C* Brown VAC in (L) Blue VAC in (N) *%- Red LED+ Black LED- Tolerance . % XX = +1mm/ -0.5mm XX.X = +/- 0.25mm . /C +C+ ( * - % -.%- /,% The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. L-30 REV: 0/2015 www.recom-power.com RACD20/277