25W Class II AC-DC LED Power Supply Features 500mA, 700mA, 1050mA or 1400mA Output LIGHTLINE Active Power Factor Correction >0.90 LED DRIVER AC/DC-Converter Efficiency to 85% EN and UL with 5 year Warranty Selection Guide Part Rated Output Output Efficiency Number Power Current Voltage (W) (mA) (VDC) (typ.) RACD25-500P 25 500 42 - 52 82% 25 Watt PFC RACD25-700P 25 700 21 - 36 85% Single RACD25-1050P 25 1050 16 - 24 84% RACD25-1400P 25 1400 12-18 83% Output Specifications (measured at 230VAC and 25C ambient temperature) Input Voltage Range 90-295 VAC or 127-417 VDC Input Frequency Range 47-63Hz Power Factor Full Load, 230VAC >0.90 Full Load, 115VAC >0.98 THD Full Load, 115VAC/230VAC 12% max. Full Load, 277VAC 14% max. Current Accuracy 700mA Version 7% RoHS 2011/65/EU others 8% 6/6 E340696 AC Input Current 115VAC 0.4A 230VAC 0.2A UL 8750 Certified Inrush Current (<2ms) 264VAC Cold Start 20A EN 61347 Certified Isolation Voltage 3.75kVAC / 1minute Short Circuit Protection Continuous Over Voltage Protection 110% - 150% RACD25-P Over Temperature Protection Rth Internal Thermistor Type Auto-Recovery Mode Vibration 10-500Hz, 2G, 60 Min. along X, Y and Z Storage Humidity 10% - 95% RH Derating-Graph Operating Humidity 20% - 95% RH Non-Condensing Weight 220g (Ambient Temperature) Dimension 174.5 x 30.5 x 25mm Operating Temperature -20C to +50C A Storage Temperature -40C to +80C . A Ripple & Noise 3V max. / A IP Rating IP67 - A ) 2 0 3+2 Isolation Resistance 100M / 500VDC at 25C , A Safety Standards EN61347-1 A EN61347-2-13 UL8750 0 , / EN61000-3-2 Class C + ) EN61000-4-2,3,4,5,6,11 Note: EN61547 All LED Drivers may not be used without a load. EN55015 FCC15 They must be switched on the primary side only. MTBF (+25C) using MIL-HDBK 217F 200 x 10 hours Noncompliance may damage the LED or reduce Desing Lifetime 70 x 10 hours its lifetime. The use of a circuit breaker with C-characteristic is recommended. Refer to Application Notes L-36 REV: 0/2015 www.recom-power.com NOT RECOMMENDED FOR NEW DESIGNSRACD25-P LIGHTLINE AC/DC-Converter Series Typical Characteristics Input Voltage vs. Output Load Maximum Number of LED drivers per circuit breakers B + Condition Circuit Breaker Circuit Breaker Current A Typ 10A 16A 20A 25A 115VAC, 1Ohm . A C 32 48 57 72 90 phase angle - A B 24 38 46 58 , A 230VAC, 1Ohm 90 phase angle C 38 62 74 92 A B 28 44 53 66 277VAC, 1Ohm 3 + * . , 3+ 90 phase angle C 44 71 84 106 8 2 2) - Package Style & Pinning ( J1 <H J1 <H 1 A 2 A D 4 ( ( A 6 4 9 ( ( The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-37