QS34XVH2245Q3G Renesas

IDTQS34XVH2245 INDUSTRIAL TEMPERATURE RANGE 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH IDTQS34XVH2245 QUICKSWITCH PRODUCTS 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH FEATURES: DESCRIPTION: N channel FET switches with no parasitic diode to VCC The QS34XVH2245 is a high bandwidth, 32-bit bus switch. The Isolation under power-off conditions QS34XVH2245 with 25 resistance and 1.35ns propagation delay is No DC path to VCC or GND ideal for line matching and low noise environments. The switches can 5V tolerant in OFF and ON state be turned ON under the control of individual LVTTL-compatible Output 5V tolerant I/Os Enable (OEx) signals for bidirectional data flow with no added delay or Flat RON characteristics over operating range ground bounce. In the ON state, the switches can pass signals up to 5V. Rail-to-rail switching 0 - 5V In the OFF state, the switches offer very high impedance at the Bidirectional dataflow with near-zero delay: no added ground terminals. bounce The combination of small propagation delay, high OFF impedance, Excellent RON matching between channels and over-voltage tolerance makes the QS34XVH2245 ideal for high VCC operation: 2.3V to 3.6V performance communications applications. High bandwidth The QS34XVH2245 is characterized for operation from -40C to LVTTL-compatible control Inputs +85C. Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical 25 resistors for low noise and line matching Available in 80-pin QVSOP package APPLICATIONS: Hot-swapping Low distortion analog switch Replaces mechanical relay ATM 25/155 switching FUNCTIONAL BLOCK DIAGRAM A0 A1 A2 A3 A4 A5 A6 A7 A16 A17 A18 A19 A20 A21 A22 A23 OE1 OE3 B16 B17 B18 B19 B20 B21 B22 B23 B0 B1 B2 B3 B4 B5 B6 B7 A8 A9 A10 A11 A12 A13 A14 A15 A24 A25 A26 A27 A28 A29 A30 A31 OE2 OE4 B24 B25 B26 B27 B28 B29 B30 B31 B8 B9 B10 B11 B12 B13 B14 B15 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE JANUARY 2013 1 c 2012 Integrated Device Technology, Inc. DSC-5592/14IDTQS34XVH2245 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH INDUSTRIAL TEMPERATURE RANGE (1) ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION Symbol Description Max Unit (2) VTERM SupplyVoltage to Ground 0.5 to +4.6 V (3) 1 VTERM DC Switch Voltage VS 0.5 to +5.5 V NC 80 Vcc (3) 2 VTERM DC Input Voltage VIN 0.5 to +5.5 V A0 79 OE1 VAC AC Input Voltage (pulse width 20ns) 3 V 3 A1 B0 78 IOUT DC Output Current (max. sink current/pin) 120 mA 4 A2 77 B1 TSTG Storage Temperature 65 to +150 C 5 A3 B2 76 NOTES: 6 A4 B3 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause 75 permanent damage to the device. This is a stress rating only and functional operation of 7 A5 B4 74 the device at these or any other conditions above those indicated in the operational 8 A6 sections of this specification is not implied. Exposure to absolute maximum rating B5 73 conditions for extended periods may affect reliability. 9 A7 B6 72 2. VCC terminals. 10 3. All terminals except VCC . GND B7 71 NC 11 Vcc 70 12 A8 OE2 69 13 A9 B8 68 CAPACITANCE (TA = +25C, F = 1MHz, VIN = 0V, VOUT = 14 B9 A10 67 (1) 0V)Symbol Parameter Typ. Max. Unit 15 A11 B10 66 CIN Control Inputs 3 5 pF 16 A12 B11 65 CI/O Quickswitch Channels (Switch OFF) 4 6 pF 17 A13 B12 64 CI/O Quickswitch Channels (Switch ON) 8 12 pF 18 A14 B13 63 NOTE: 1. This parameter is guaranteed but not production tested. 19 A15 62 B14 GND 20 B15 61 NC 21 Vcc 60 A16 22 OE3 59 PIN DESCRIPTION A17 23 B16 58 A18 Pin Names I/O Description 24 57 B17 OEx I Output Enable A19 25 56 B18 Ax I/O Bus A 26 A20 B19 55 Bx I/O Bus B 27 A21 B20 54 28 A22 B21 53 29 A23 52 B22 30 GND B23 (1) 51 FUNCTION TABLE NC 31 50 Vcc OEx Function 32 A24 49 OE4 H Disconnected 33 A25 48 B24 L Connect (Ax = Bx) A26 34 47 B25 NOTE: 35 A27 46 B26 1. H = HIGH Voltage Level 36 A28 L = LOW Voltage Level 45 B27 A29 37 44 B28 38 A30 43 B29 39 A31 B30 42 40 GND B31 41 QVSOP TOP VIEW 2