QS3VH16210PAG Renesas

IDTQS3VH16210 INDUSTRIAL TEMPERATURE RANGE 2.5V / 3.3V 20-BIT 2 PORT, HIGH BANDWIDTH BUS SWITCH PRODUCTS QUICKSWITCH IDTQS3VH16210 2.5V / 3.3V 20-BIT 2-PORT, HIGH BANDWIDTH BUS SWITCH FEATURES: DESCRIPTION: N channel FET switches with no parasitic diode to Vcc The QS3VH16210 HotSwitch with 20-bit flow-though pin is a high Isolation under power-off conditions bandwidth bus switch. The QS3VH16210 has very low ON resistance, No DC path to Vcc or GND resulting in under 250ps propagation delay through the switch. The 5V tolerant in OFF and ON state switches are controlled by active low enable (xOE) controls. The QS3VH16210 5V tolerant I/Os is organized as a dual 10-bit, 2-port bus switch with separate, xOE control Low RON - 4 typical inputs. In the OFF and ON states, the switches are 5V-tolerant. In the OFF Flat RON characteristics over operating range state, the switches offer very high impedance at the terminals. Rail-to-rail switching 0 - 5V The combination of near-zero propagation delay, high OFF impedance, Bidirectional dataflow with near-zero delay: no added ground and over-voltage tolerance makes the QS3VH16210 ideal for high perfor- bounce mance communications applications. Excellent RON matching between channels The QS3VH16210 is characterized for operation from -40C to +85C. Vcc operation: 2.3V to 3.6V High bandwidth - up to 500 MHz LVTTL-compatible control Inputs Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical Available in TSSOP package APPLICATIONS: Hot-swapping 10/100 Base-T, Ethernet LAN switch Low distortion analog switch Replaces mechanical relay ATM 25/155 switching FUNCTIONAL BLOCK DIAGRAM 2B1 1A1 1B1 2A1 1A10 1B10 2A10 2B10 1OE 2OE The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE JULY 2013 1 c 2013 Integrated Device Technology, Inc. DSC-5881/8IDTQS3VH16210 2.5V / 3.3V 20-BIT 2 PORT, HIGH BANDWIDTH BUS SWITCH INDUSTRIAL TEMPERATURE RANGE (1) ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION Symbol Description Max. Unit (2) VTERM Supply Voltage to Ground 0.5 to 4.6 V (3) VTERM DC Switch Voltage VS 0.5 to 5.5 V 1OE NC 1 48 (3) VTERM DC Input Voltage VIN 0.5 to 5.5 V 2OE 1A1 2 47 VAC AC Input Voltage (pulse width 20ns) 3 V 1B1 1A2 3 46 IOUT DC Output Current (max. current/pin) 120 mA 1A3 1B2 4 45 TSTG Storage Temperature -65 to +150 C NOTES: 1A4 5 44 1B3 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may 1A5 6 43 cause permanent damage to the device. This is a stress rating only and functional 1B4 operation of the device at these or any other conditions above those indicated in the 1A6 7 42 1B5 operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. GND GND 8 41 2. VCC terminals. 3. All terminals except VCC. 1A7 9 40 1B6 1A8 10 39 1B7 o CAPACITANCE (TA = +25 C, f = 1MHz, VIN = 0V, VOUT = 0V) 1A9 11 38 1B8 (1) Symbol Parameter Typ. Max. Unit 1A10 12 37 1B9 CIN Control Inputs 3 5 pF 1B10 2A1 13 36 CI/O Quickswitch Channels (Switch OFF) 4 6 pF 2B1 14 35 2A2 CI/O Quickswitch Channels (Switch ON) 8 12 pF 2B2 NOTE: VCC 15 34 1. This parameter is guaranteed but not production tested. 2B3 2A3 16 33 GND 17 32 GND 2B4 2A4 18 31 PIN DESCRIPTION 2B5 2A5 19 30 Pin Names Description 2B6 xOE Bus Enables (Active LOW) 2A6 20 29 1A1 - 1A10, 2A1 - 2A10 Bus A 2B7 2A7 21 28 1B1 - 1B10, 2B1 - 2B10 Bus B 2B8 2A8 22 27 2B9 2A9 23 26 2A10 24 25 2B10 (1) FUNCTION TABLE (EACH 10-BIT BUS SWITCH) TSSOP Control Input TOP VIEW xOE Function L A port = B port H Disconnect NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level 2