External dimensions (Unit : mm) RPI-579 10 Photointerrupter, General type 13.8 2-0.8 2.35 Through hole Absolute maximum ratings (Ta=25C) Parameter Symbol Limits Unit Applications Forward current IF 50 mA 4-1.0 Printers Reverse voltage VR 5 V 8.95 Facsimiles Power dissipation PD 80 mW Gap AV equipment Collector-emitter voltage VCEO 30 V 5 0.8 Emitter-collector voltage VECO 4.5 V 0.5 Features Collector current IC 30 mA A 1) Heat resistance (170C). Collector power dissipation PC 80 mW 2) Small gap (0.5mm) and good accuracy. Operating temperature Optical center Topr 25 to +85 C 3) Quick response time. Storage temperature Tstg 40 to +85 C 4) Filter against visible ray is built-in. Soldering temperture Tsol 260 / 3 C / s 1mm from the body bottom. Electrical and optical characteristics (Ta=25C) A Parameter Symbol Min. Typ. Max. Unit Conditions Forward voltage VF 1.3 1.6 VIF=50mA 40.4 2-0.45 (2.54) (10) Reverse current IR 10 A VR=10V Dark current ICEO 0.5 A VCE=10V Cathode Collector Peak sensitivity wavelength P 800 nm 14(Bottom) Collector current IC 0.5 VCE=5V, IF=20mA mA VCE(sat) 0.1 0.5 V IF=20mA, IC=0.1mA Collector-emitter saturation voltage Notes: Rise time tr 10 s 1. Unspecified tolerance Response time VCC=5V, IF=20mA, RL=100 shall be 0.2 . Fall time 10 s tf Anode Emitter 2. Measurement in the bracket is Cut-off frequency fC 1 MHz that of lead pin at base the mold. IF=50mA Non-coherent Infrared light emitting diode used. 950 nm 3. Dimension in parenthesis are Peak light emitting wavelength P show for reference. VCC=5V, IC=1mA, RL=100 2-0.70.1 2.350.1 6.60.1 Response time tr tf 10 s 4. Please be carefully not to receive This product is not designed to be protected against electromagnetic wave. external disturbing light because the top and back face emitter and Maximum sensitivity wavelength P 800 nm detector element isn t covered by case. Electrical and optical characteristics curves 1000 5 50 25C 100 50 0C 4 100 25C 40 50C d 80 40 200 75C 3 tr tf 100 10 30 RL=5k VCE=30V 60 30 VCE=20V tr 50 tf VCE=10V 2 RL=2k 20 tf 1 tr 40 20 RL=1k 20 1 10 20 10 0.1 10 0 0 0 0 0312 45 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 10 20 50 100 200 500 1000 2000 25 0 25 50 75 100 20 0 20 40 60 80 100 0 1020304050 AMBIENT TEMPERATURE : Ta (C) DISTANCE : d (mm) FORWARD VOLTAGE : VF (V) FORWARD CURRENT : IF (mA) COLLECTOR CURRENT : Ic (A) AMBIENT TEMPERATURE : Ta (C) Fig.8 Response time vs. Fig.9 Dark current vs. ambient Fig.3 Forward current vs. forward voltage Fig.1 Relative output vs. distance ( ) Fig.2 Forward current falloff Fig.7 Collector current vs. forward current collector current temperature 3.0 160 Input VCC 140 100 100 120 IF=25mA 2.0 80 PD PC Input 100 80 20mA Output 90% 60 80 RL 60 15mA 10% 60 Output 1.0 40 40 10mA td 40 tr tf 20 20 5mA td : Delay time 20 t r : Rise time (time for output current to rise 0 0 0 0 from 10% to 90% of peak current) 0312 45 4020 0 20406080 100 0 248610 20 0 20406080 100 t f : Fall time (time for output current to fall COLLECTOR-EMITTER VOLTAGE : VCE (V) DISTANCE : d (mm) AMBIENT TEMPERATURE : Ta (C) AMBIENT TEMPERATURE : Ta (C) from 90% to 10% of peak current) Fig.5 Power dissipation / collector power Fig.6 Relative output vs. ambient Fig.4 Relative output vs. distance ( ) dissipation vs. ambient temperature temperature Fig.10 Output characteristics Fig.11 Response time measurement circuit Output ( ) photo- Input LED Infrared Transfer Output Input Photo ( ) transistor light characteristics charac- charac- transistor emitter teristics teristics diode RELATIVE COLLECTOR CURRENT : Ic (%) RELATIVE COLLECTOR CURRENT : Ic (%) d POWER DISSIPATION / COLLECTOR POWER DISSIPATION : PD / Pc (mW) FORWARD CURRENT : IF (mA) RELATIVE COLLECTOR CURRENT : Ic (%) FORWARD CURRENT : IF (mA) COLLECTOR CURRENT : Ic (mA) COLLECTOR CURRENT : IC (mA) 10 3.50.4 7.5 6.0 RESPONSE TIME : t (s) 5.20.1 2.5 0.7 6 5.2 2.54 1.6 DARK CURRENT : ID (nA) 2.6 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party s intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer s right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies toobjectiv criteria or aninforme (by MITI clause) on the basis ofcatch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1