GP1S173LCS2F GP1S173LCS2F Gap : 5.0mm Slit : 0.5mm Photo transistor Output, Compact Transmissive Photointerrupter with connector Description Agency approvals/Compliance GP1S173LCS2F is a standard, phototransistor output, 1. Compliant with RoHS directive (2002/95/EC) transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs. Applications 1. General purpose detection of object presence or motion. Example : PPC, FAX, Printer Features 1. Transmissive with phototransistor output 2. Highlights : Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm) Snap insertion 3. Key Parameters : Gap Width : 5mm Slit Width (detector side) : 0.5mm Package : 17 12.8 8mm (without connector and hooks) Connector : Tyco Electronics JAPAN G.K. (173977-3 and 179228-3) 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: OP13014EN 1 GP1S173LCS2F Internal Connection Diagram Anode Collector GND Outline Drawing No. CY14032i02A Scale : 2/1 Unit : 1/1 mm Date 10 11 12 13 14 1. Unspecified tolerance shall be followed the list below. Note) Code A B C D E 2. Dimensions in parenthesis are shown for reference. Date 15 16 17 18 19 3. Coupling and contact : CT receptacle connector (173977-3 and 179228-3) by Tyco Electronics Japan G.K. Code F G H J K Date 20 21 22 23 24 4. Date code Y : Year (2012 : 2) Number of the end of the Christian era Code M N O P R M : Month (1-9, X, Y, Z) Date 25 26 27 28 29 D : Date (1-9, Please refer to a right list other than it.) Code S T U W X Date 30 31 Code Y Z Dimension Tolerance less than 5.0 0.15 5.0 or more less than 15.0 0.2 15.0 or more 0.3 Sheet No.: OP13014EN 2