Technical Data Sheet Female to 2.92mm Female WSMP W1K102-K00D3 Test Adapter All dimensions are in inches mm Unless otherwise specified, tolerances are as follows: .XXX .001 0,025 .XXXX .0005 0,012 Interface According to Rosenberger WSMP Interface standards Material and plating Connector parts Material Plating WSMP (F) Body and Contact CuBe per ASTM B196 Hard gold 50IN 1,27m min over Nickel 50IN 1,27m min 2.92mm Body Stainless Steel per Passivated ASTM A582 Dielectric PTFE PER ASTM D1710 Dielectric Ultem 1000 PER D5205 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 1 / 2 PROPRIETARY AND CONFIDENTIAL This data sheet is the property of Rosenberger of North America, LLC. By acceptance of this document you agree that all the rights to drawings, specifications, processes and other data therein, as well as the proprietary and novel features of the subject matter, are reserved by Rosenberger of North America, LLC and are disclosed in confidence. They are not to be manufactured, used, sold or disclosed to others, nor are devices embodying such features or information derived from these disclosures to be used or disclosed, unless and until expressly authorized by Rosenberger of North America, LLC. These drawings, specifications, processes, etc., are and remain the property of Rosenberger of North America, LLC, and are not to be copied or reproduced without permission. Technical Data Sheet Female to 2.92mm Female WSMP W1K102-K00D3 Test Adapter Electrical data Impedance 50 Frequency DC to 40 GHz Return loss (typical) 19 dB, DC to 40 GHz f(GHz) Insertion loss 0.12 x dB Insulation resistance 3,500 M Center contact resistance 6.0 m Outer contact resistance 2.0 m Test voltage (at sea level) 250 V rms RF High Potential (at sea level) 150 V rms 5 MHz RF leakage -80 dB 3 GHz (typical mated pair) Mechanical data Mating cycles - Full Detent 100 - Smooth Bore 500 - Ultra Smooth Bore 500 Engagement force (typical) - Full Detent 2.5 lb 11 N f - Smooth Bore 1.2 lb 5.3 N f - Ultra Smooth Bore 1.0 lb 4.5 N f Disengagement force (typical) - Full Detent 4.5 lb 20 N f - Smooth Bore 1.0 lb 4.5 N f - Ultra Smooth Bore 1.0 lb 4.5 N f Environmental data Temperature range -55C to +165C Thermal shock MIL-STD-202-107, Condition B Corrosion MIL-STD-202-101 Vibration MIL-STD-202-204, Condition D Shock MIL-STD-202-213, Condition I Moisture resistance MIL-STD-202-106, except Step 7B 2002/95/EC (RoHS) compliant Tooling Extraction tool N/A Suitable cables N/A Packing Standard Draft Date Approved Date Rev. Engineering change number Name Date R. Hosler 8/18/14 M. Peeran 8/18/14 a00 Released per 19-s000 P. Sill 1/11/19 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 2 / 2 PROPRIETARY AND CONFIDENTIAL This data sheet is the property of Rosenberger of North America, LLC. By acceptance of this document you agree that all the rights to drawings, specifications, processes and other data therein, as well as the proprietary and novel features of the subject matter, are reserved by Rosenberger of North America, LLC and are disclosed in confidence. They are not to be manufactured, used, sold or disclosed to others, nor are devices embodying such features or information derived from these disclosures to be used or disclosed, unless and until expressly authorized by Rosenberger of North America, LLC. These drawings, specifications, processes, etc., are and remain the property of Rosenberger of North America, LLC, and are not to be copied or reproduced without permission.