RM17JC00MW Schneider

Product data sheet RM17JC00MW Characteristics current control relay RM17-J - range: 2..20 A Product availability: Stock - Normally stocked in distribution facility Main Range of product Zelio Control Product or component Modular measurement and control relays type Relay type Current control relay Relay name RM17JC Relay monitored para- Overcurrent detection meters Time delay Without Switching capacity in 1250 VA VA Minimum switching cur- 10 mA at 5 V DC rent Power consumption in 3 VA VA Measurement range 2...20 A current Utilisation category AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 DC-14 conforming to IEC 60947-5-1 Complementary Maximum switching voltage 250 V AC/DC Us rated supply voltage 24...240 V AC/DC, 50/60 Hz +/- 10 % Supply voltage limits 20.4...264 V AC/DC Operating voltage tolerance - 15 % + 10 % Un Power consumption in W <= 1 W Control circuit frequency 40...70 Hz sinusoidal Output contacts 1 C/O Nominal output current 5 A Measuring cycle <= 30 ms measurement cycle as true rms value Hysteresis 15 % fixed of threshold setting Delay at power up 0.5 s Measurement accuracy +/- 10 % of the full scale value Repeat accuracy +/- 0.5 % input and measurement circuit Measurement error +/- 0.05 %/C with temperature variation < 1 % over the whole range with voltage variation Response time < 200 ms in the event of a fault Polarity Yes DC Threshold setting 10...100 % Input current 100000 mA permanent at 25 C 300000 mA non repetitive < 3 s at 25 C Marking CE : 73/23/EEC CE : EMC 89/336/EEC Overvoltage category III conforming to IEC 60664-1 Insulation resistance > 500 MOhm at 500 V DC conforming to IEC 60255-5 > 500 MOhm at 500 V DC conforming to IEC 60664-1 Ui rated insulation voltage 400 V conforming to IEC 60664-1 Insulation Between supply and measurement Aug 10, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Operating position Any position without derating Connections - terminals Screw terminals 1 x 0.5...1 x 4 mm - AWG 20...AWG 11, solid cable without ca- ble end Screw terminals 2 x 0.5...2 x 2.5 mm - AWG 20...AWG 14, solid cable without cable end Screw terminals 1 x 0.2...1 x 2.5 mm - AWG 24...AWG 12, flexible cable with ca- ble end Screw terminals 2 x 0.2...2 x 1.5 mm - AWG 24...AWG 16, flexible cable with ca- ble end Tightening torque 5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1 Housing material Self-extinguishing plastic Local signalling LED green power ON LED yellow relay ON Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715 Electrical durability 100000 cycles Mechanical durability 30000000 cycles Operating rate <= 360 operations/hour under full load Contacts material Cadmium free Width 0.69 in (17.5 mm) Product weight 0.29 lb(US) (0.13 kg) Environment Immunity to microbreaks 10 ms Electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC 61000-6-4 Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3 Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 Standards EN/IEC 60255-6 Product certifications C-Tick GL GOST CSA UL Ambient air temperature for storage -40...158 F (-40...70 C) Ambient air temperature for operation -4...122 F (-20...50 C) Relative humidity 95 % at 131 F (55 C) conforming to IEC 60068-2-30 Vibration resistance 0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6 1 gn (f = 57.6...150 Hz) conforming to IEC 60255-21-1 Shock resistance 15 gn 11 ms conforming to IEC 60255-21-1 IP degree of protection IP20(Terminals) conforming to IEC 60529 IP30 (casing) conforming to IEC 60529 Pollution degree 3 conforming to IEC 60664-1 Dielectric test voltage 2 kV AC 50 Hz Non-dissipating shock wave 4 kV Ordering and shipping details Category 22380 - RELAYS-MEASUREMENT (RM17-RM35) Discount Schedule CP2 GTIN 00785901996408 Nbr. of units in pkg. 1 Package weight(Lbs) 0.28000000000000003 Returnability Y Country of origin ID 2