RClamp0552T Ultra Low Capacitance TVS 2-Line ESD Protection PROTECTION PRODUCTS PROTECTION PRODUCTS - RailClamp Features Description RailClamp TVS arrays are ultra low capacitance ESD High ESD withstand Voltage: +/-17kV (Contact and protection devices designed to protect high speed data Air) per IEC 61000-4-2 2 interfaces. They are designed to replace 0201 size mul- Very small PCB area: 0.6mm tilayer varistors (MLVs) in portable applications such as Protects up to two high-speed data lines cell phones, notebook computers, and other portable Low reverse current: <5nA typical (VR=5V) electronics. This device offers desirable characteristics Working voltage: +/- 5V for board level protection including fast response time, Low capacitance: <0.4pF (VR=0V) low operating and clamping voltage, and no device deg- Low dynamic resistance: 0.90 Ohms (Typ) radation. Solid-state silicon-avalanche technology The RClamp 0552T has a maximum capacitance of only 0.40pF. This allows it to be used on circuits Mechanical Characteristics operating in excess of 5GHz without signal attenuation. SLP1006N3T package The RClamp0552T is in a 3-pin SLP1006N3T package. Pb-Free, Halogen Free, RoHS/WEEE Compliant It measures 1.0 x 0.6 mm with a nominal height of only Nominal Dimensions: 1.0 x 0.6 x 0.40 mm 0.4mm. The leads are finished with lead-free NiPdAu. Lead Finish: NiPdAu Each device will protect two lines operating at 5 volts. Molding compound flammability rating: UL 94V-0 It gives the designer the flexibility to replace multiple Marking : Marking code + dot matrix date code single line devices in space constrained applications. Packaging : Tape and Reel They may be used to meet the ESD immunity require- ments of IEC 61000-4-2. The combination of small Applications size and high ESD surge capability makes them ideal for use in portable applications such as cellular HDMI 1.3 and HDMI 1.4 phones, digital cameras, and MP3 players. USB 3.0 MHL eDP LVDS Interfaces eSATA Interfaces Dimensions Schematic & PIN Configuration 12 1.00 0.68 12 0.60 0.40 3 Nominal Dimensions (mm) 2-Line, Bidirectional www.semtech.com Revision 3/19/2013 1RClamp0552T PROTECTION PRODUCTS Absolute Maximum Rating Rlating Seymbo Vsalu Unit PPeak Pulse Power (tp = 8/20s) 6s0 Watt pk M)aximum Peak Pulse Current (tIp = 8/20s 3sAmp pp 1 ESD per IEC 61000-4-2 (Air) V +/- 17 kV ESD 1 ESD per IEC 61000-4-2 (Contact) +/- 17 OTperating Temperature -C55 to +125 J STtorage Temperature -C55 to +150 STG o Electrical Characteristics (T=25 C) Plarameter SsymboCmondition MlinimuTmypicaMsaximu Unit RVeverse Stand-Off Voltage Any I/O Pin 5V RWM to GND RVeverse Breakdown Voltage I = 1mA 69.5 1V1 BR t Any I/O Pin to GND RIeverse Leakage Current V = 2V, T=25C <05 2An R RWM Any I/O Pin to GND RIeverse Leakage Current V = 5V, T=25C <055 1A0 n R RWM Any I/O Pin to GND CVlamping Voltage I = 3A, tp = 8/20s 2V0 C PP Any I/O Pin to GND 2 ESD Clamping Voltage V I = 16A, 2V4.5 C PP tlp = 0.2/100ns 2, 3 Dynamic Resistance Rt0p = 100ns 0s.9 Ohm Dyn JCunction Capacitance V = 0V, f = 1MHz 04.21 0F. p j R Any I/O Pin to GND Notes 1)ESD gun return path connected to ESD ground reference plane. 2)Transmission Line Pulse Test (TLP) Settings: t = 100ns, t = 0.2ns, I and V averaging window: t = 70ns to t = 90ns. p r TLP TLP 1 2 3) Dynamic resistance calculated from I = 4A to I = 16A TLP TLP 4)Guaranteed by design. Not production tested www.semtech.com 2013 Semtech Corporation 2