D06D100 Sensata

Panel Mount Datasheet D06D Series Ratings from 60 A to 100 A 60 VDC DC control Mosfet output EMC Compliant to Level 3 UL Approved, CE Compliant to EN60950-1 Epoxy Free Design Improved SEMS screw and washer Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 60 A 80 A 100 A 3.5-32 VDC D06D60 D06D80 D06D100 AVAILABLE OPTIONS Termination Blank: Screws & clamps Operating Voltage K: Installed standoffs with (1) screws for PC Board mounting Series 06D: 1-60 VDC 06D K H D 60 Rated Load Current Thermal Pad 60: 60 Amps Blank: Not Included 80: 80 Amps H: Included Required for valid part number 100: 100 Amps For options only and not required for valid part number Not all part number combinations are available. * Contact Crydom Technical Support for information on the availability of a specific part number. (2) OUTPUT SPECIFICATIONS Description 60 A 80 A 100 A Recommended Operating Voltage Vdc 1-48 1-48 1-48 Absolute Maximum Rating Vdc 60 60 60 Maximum Off-State Leakage Current Rated Voltage mA 0.1 0.1 0.3 Maximum Load Current Adc (1)(3) 60 80 100 Minimum Load Current mA (4) 5 5 5 Maximum Surge Current (10 msec) Adc 180 220 270 Maximum On-State Voltage Drop Rated Current Vdc 0.6 0.7 0.5 Maximum On-State Resistance RDS-ON Ohms 0.01 0.008 0.005 Thermal Resistance Junction to Case (Rjc) C/W 0.73 0.73 0.51 Minimum Heat Sink for Rated Current 40C C/W 1 0.5 0.5 Maximum Pulse Width Modulation Frequency Hz (5) 1000 900 700 (2) INPUT SPECIFICATIONS Description DC Control Control Voltage Range 3.5-32 VDC Maximum Reverse Voltage -32 VDC Minimum Turn-On Voltage (6) 3.5 VDC Must Turn-Off Voltage 1 VDC Minimum Input Current (for on-state) 10 mA Maximum Input Current 15 mA Nominal Input Impedance Current Regulated Maximum Turn-On Time sec 100 Maximum Turn-Off Time sec 150 Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice.Panel Mount Datasheet (2) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 100C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 2.66 oz (75.5 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/K option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size 6-32 UNC / 8-32 UNC Humidity per IEC60068-2-78 93% non-condensing 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 40C ambient temperature (8) 11,545,504 hours (1,317 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (8) WIRING DIAGRAM * Inductive loads must be diode suppresed. + + - V * * V Load Load - + + Recommended Wire Sizes Wire Size Wire Pull-Out Terminals (Solid / Stranded) Strength (lb) N 2 24 AWG (0.2 mm ) / 0.2 minimum 10 44.5 Input +2 +2 1 OUTPUT 1 OUTPUT 2 2 x 12 AWG (3.3 mm ) / 3.3 maximum 90 400 S OL I D S T A T E R EL A Y S OL I D S T A T E R EL A Y 2 20 AWG (0.5 mm ) / 0.518 minimum 30 133 4 INPUT +3 4 INPUT +3 Output 2 2 x 10 AWG (5.3 mm ) / 5.3 110 490 2 2 x 8 AWG (8.4 mm ) / 8.4 maximum 90 400 + + V V - - EQUIVALENT CIRCUIT BLOCK DIAGRAMS Input Current vs Input Voltage Standard Regulated DC Input 14 +DC 33 22 +DC 12 10 Control Trigger 8 Circuit Circuit 6 4 -DC 44 11 -DC 2 0 0 5 10 15 20 25 30 35 DC Input Voltage Do not forget to visit us at: www.crydom.com Copyright 2020 Crydom Inc. Specifications subject to change without notice. Input Current (mA)