DRA4-CMXE200D3 Sensata

DIN Rail Mount DataSheet DRA4 CMX Series 54mm 4 Channel DIN Rail Mount SSR Assembly DC Ratings up to 200 VDC and 8 Amps 3-10 and 20-28VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 8 A (3) Control Voltage 3 A 3-10 VDC Control DRA4-CMX200D3 DRA4-CMX100D10 DRA4-CMXE200D3 DRA4-CMXE100D10 20-28 VDC Control OUTPUT SPECIFICATIONS (1) Description 3 A 8 A (3) Operating Voltage VDC 1-200 1-100 100 Maximum Off-State Leakage Current Rated Voltage Adc 100 Maximum Load Current A (2) (3) 3 8 Minimum Load Current A 0 0 0.2 Maximum On-State Resistence Ohm 0.01 30 Maximum Surge Current (10msec) Apk 100 0.6 Maximum On-State Voltage Drop Rated Current VDC 0.1 INPUT SPECIFICATIONS (1) Description DRA1-CMX DRA1-CMXE Control Voltage Range 20.0-28.0 VDC 3.0-10.0 VDC Must Turn On Voltage 3.0 VDC 20.0 VDC Must Turn Off Voltage 1.0 VDC 1.0 VDC Typical Input Current 12 mAdc 20 Vdc 15 mAdc 5Vdc Nominal Input Impedance 300 Ohm 780 Ohm 1 1 Maximum Turn-On Time msec 300 300 Maximum Turn-Off Time sec (1) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength (4) 2500 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (4) 10 Ohm Maximum Capacitance, Input/Output 15 pF Ambient Operating Temperature Range -20 to 80C Ambient Storage Temperature Range -20 to 125 C Weight (typical) 0.23 oz (104.6 g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) See derating chart on page 3. (3) Steady state load Current exceeding 8 amps will damage socket. (4) Dielectric and insulation resistance is measured between input and output. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet WIRING DIAGRAM (A) Wiring Diagram INPUT OUTPUT 0.20 0.40 5.1 10.2 0.50 (C) 4 2 12.7 (B) LOAD - CONTROL 4 3 2 1 + LOAD (B) (C) 3 + 1+ (A) Wiring diagram is identical for each individual section wheter it is a single or four channel assembly. (B) Load can be placed on either side of Power. (C) DC Inductive loads must be diode supressed to provent damage to SSR. THERMAL DERATE INFORMATION DRA4-CMX Derating Curve 8 CMX(E)100D10 7 CMX(E)200D3 6 5 4 3 2 1 0 20 30 40 50 60 70 80 Ambient Temperature (C) Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amperes)