DIN Rail Mount DataSheet DRA4D Series DC Motor Reversing Contactor Ratings of 6 & 12 Amps Load voltage ratings of 1-100VDC and 1-250VDC Fits standard 35mm DIN-RAIL LED input status indicator. Green (Forward), Yellow (Reverse) DC control cUL Recognized, IEC Rated, CE & RoHS Compliant Horsepower Rated PRODUCT SELECTION Control Voltage 12 A 6 A DRA4D250D6 5-15 VDC Control DRA4D100D12 15-32 VDC Control DRA4D100E12 DRA4D250E6 AVAILABLE OPTIONS Load Voltage Current Rating 100: 1-100 VDC 12 A 6: 6 Amps 250: 1-250 VDC 6 A 12: 12 Amps Series DRA 4D D 6 100 Function Control Voltage 4D: H-Bridge D: 5-15 VDC E: 15-32 VDC Required for valid part number For options only and not required for valid part number (1) OUTPUT SPECIFICATIONS DRA4D100x12 DRA4D250x6 Description 1-250 (2) Operating Voltage VDC 1-100 (3) 6 (5) Maximum Load Current Adc (4) 12 1.0 Minimum Load Current mAdc 1.0 20 Maximum Off-State Leakage Current Rated Voltage uA 1.0 0.1 Maximum On-State Voltage Drop Rated Current Vpk 0.1 91 Maximum Surge Current (10ms) Apk 110 0.45 On-State resistance at rated current (RDSOn) Ohms 0.011 Thermal Resistance Junction to Case (Rjc) C/W 0.48 0.45 24/10 24/10 Min/Max stranded/solid wire AWG Min/Max stranded/solid wire IEC mm 0.5-4.0 0.5-4.0 HP Rating per UL508 40C 1/4, 4 FLA 90 VDC 1/4, 2 FLA 180 VDC 6.0 FLA 180 VDC, 1KW IEC 60947-4-1 Ratings DC-1 12 FLA 90 VDC, 1KW IEC 60947-4-1 Ratings DC-3 4.0 FLA 90 VDC, 360W 2.0 FLA 180 VDC, 360W Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet (1) INPUT SPECIFICATIONS Description DRA4DxxxD DRA4DxxxE 15-32 VDC Control Voltage Range 5.0-15 VDC Must Turn On Voltage 15 VDC 5.0 VDC Must Turn Off Voltage 2.5 VDC 2.9 VDC Minimum Input Current mA 16 20.5 Maximum Input Current mA 24.5 22 See Note 6 Nominal Input Impedance See Note 6 Maximum Turn-On Time msec 22 22 Maximum Turn-Off Time msec 0.264 0.33 24/12 Min/Max stranded/solid wire 24/12 Min/Max stranded/solid wire IEC mm 0.5-2.5 0.5-2.5 GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 2500Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 35 pF 1KHz Ambient Operating Temperature Range -30C to 60C Ambient Storage Temperature Range -30C to 85C Recommended Terminal Screw Torque: 4.0 in lb (0.45 Nm) GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) UL maximum rated voltage is 180 VDC (3) UL maximum rated voltage is 90 VDC. (4) At 40C and mounted in vertical position (5) At 40C single unit, multiple units need spacing of 45mm. No spacing maximum current is 5.5 A (6) Input circuitry incorporates active current limiter. WIRING DIAGRAM + + M1 - - S1 M2 F - + - R S2 Do not forget to visit us at: www.crydom.com Copyright 2018 Crydom Inc. Specifications subject to change without notice.