PC1S3052NTZF Sharp

PC1S3052NTZF Series V : 600V DRM PC1S3052NTZF Non-zero cross type DIP 6pin Series Phototriac Coupler for triggering Description Agency approvals/Compliance PC1S3052NTZF Series Phototriac Coupler include 1. Recognized by UL1577 (Double protection isolation), an infrared emitting diode (IRED) optically coupled to le No. E64380 (as model No. 1S3052) an output Phototriac. 2. Approved by CSA, le No. CA95323 (as model No. These devices feature full wave control and are ideal 1S3052) isolated drivers for medium to high current Triacs. 3. Optionary available VDE Approved (DIN EN DIP package provides 5kV isolation from input to 60747-5-2), le No. 4008189 (as model No. 1S3052) output with superior commutative noise immunity. 4. Package resin : UL ammability grade (94V-0) Features Applications 1. High repetitive peak off-state voltage (V : 600V) 1. Triggering for Triacs used to switch on and off DRM 2. Non-zero crossing functionality devices which require AC Loads 3. 6pin DIP package For example heaters, fans, motors, solenoids, and 4. Superior noise immunity (dV/dt : MIN. 1 000V/ s) valves 5. Double transfer mold construction (Ideal for Flow 2. Triggering for Triacs used for implementing phase Soldering) control in applications such as lighting control and 6. High isolation voltage between input and output temperature control (HVAC). (V (rms) : 5kV) 3. AC line control in power supply applications. iso 7. Lead-free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D2-A08801EN 1 Date Dec. 1. 2005 SHARP CorporationPC1S3052NTZF Series Internal Connection Diagram 1 Anode 1 6 2 Cathode 3 NC 2 5 4 Anode/Cathode 5 No external connection 3 4 6 Cathode/Anode Outline Dimensions (Unit : mm) 1. Through-Hole [ex. PC1S3052NTZF] 0.3 1.2 0.2 0.6 Model No. SHARP 6 5 4 mark 1S3052 Anode mark Date code (2 digit) 1 2 3 Factory identification mark 0.5 0.3 7.12 7.62 Epoxy resin 0.1 0.25 0.5 2.54 : 0 to 13 Product mass : approx. 0.35g 2. SMT Gullwing Lead-Form [ex. PC1S3052NXPF] 0.3 1.2 0.2 0.6 6 5 4 Model No. SHARP mark 1S3052 Anode mark Date code (2 digit) 1 2 3 Factory identification mark 0.5 7.12 0.3 7.62 0.25 2.54 Epoxy resin +0.4 +0.4 1 1 0 0 +0 10 0.5 Product mass : approx. 0.33g 5 Pin is not allowed external connection Plating material : SnCu (Cu : TYP. 2%) Sheet No.: D2-A08801EN 2 0.5 2.9 0.5 0.5 6.5 0.5 0.5 3.5 3.5 6.5 0.5 TYP. 0.1 3.25 0.5 0.26 0.25 0.35