ATN3590-05 Skyworks

DATA SHEET ATN3590 Series: Fixed Attenuators Applications Level adjustment in radios, radars, EW/ECM equipment, and test instruments Features Fixed value, absorptive devices Available attenuation values range from 0 to 10 dB (in 1 dB steps), and 12, 15, 20, and 30 dB Suitable for use to 40 GHz or higher Excellent return loss: 30 dB, typical Out Enhanced power handling: 2 W Back Side Back Side TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks In TM Denition of Green , document number Schematic SQ040074. Figure 1. Typical Attenuator Die and Circuit Description The ATN3590 family of fixed resistive attenuators are integrated circuits comprising thin film resistors and through-die vias that provide excellent attenuation flatness from low frequency to 40 GHz or higher. These attenuators are available from 0 to 30 dB (see Table 2). The ATN3590 attenuator family is optimized for surface mounting on co-planar waveguide or microstrip printed circuit boards. Bond wires or ribbons are used to connect the input and output ports of the attenuators to the external circuit transmission lines. Connection to ground is accomplished by through-die vias to the die backside metallization. The dice are attached using eutectic solder or conductive epoxy and can operate over a temperature range of 65 C to 150 C. The absolute maximum ratings for the ATN3590 attenuators are provided in Table 1, and the electrical specifications are shown in Table 2. Typical performance characteristics are illustrated in Figures 2 through 8. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200842E Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 6, 2016 1 DATA SHEET ATN3590 SERIES FIXED ATTENUATORS 1 Table 1. ATN3590 Series Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units Input power PIN 2 W Power dissipation 25 C PDIS 2 W Operating temperature TOP 55 +150 C Storage temperature TSTG 55 +150 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry- standard ESD handling precautions should be used at all times. 1 Table 2. ATN3590Series Electrical Specifications (TOP = +25 C, Characteristic Impedance ZO = 50 , Unless Otherwise Noted) Attenuation Attenuation Attenuation Attenuation Attenuation Flatness Flatness Flatness Flatness Min. Return Min. Return Min. Return Min. Return Tolerance (Note 2) (Note 2) (Note 2) (Note 2) Loss Loss Loss Loss Attenuation DC DC12 GHz 1226 GHz 2633 GHz 3340 GHz DC12 GHz 1226 GHz 2633 GHz 3340 GHz Part Number (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) ATN3590-00 0 0.25 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-01 1 0.20 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-02 2 0.20 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-03 3 0.20 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-04 4 0.20 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-05 5 0.20 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-06 6 0.40 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-07 7 0.40 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-08 8 0.40 0.15 0.15 0.20 0.20 28 24 20 16 ATN3590-09 9 0.40 0.20 0.20 0.25 0.30 28 24 20 16 ATN3590-10 10 0.40 0.20 0.20 0.25 0.50 28 24 20 16 ATN3590-12 12 0.40 0.20 0.20 0.30 0.50 28 24 20 16 ATN3590-15 15 0.40 0.20 0.20 0.50 0.75 28 24 20 16 ATN3590-20 20 1.0 0.20 0.20 0.75 1.00 28 24 20 16 ATN3590-30 30 1.0 0.20 0.25 0.75 2.50 28 24 20 16 1 Performance is guaranteed only under the conditions listed in this Table. 2 Flatness is defined as the maximum deviation from the mean value of attenuation over the specified frequency range. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 May 6, 2016 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200842E