SKYFR-000939 Skyworks

DATA SHEET SKYFR-000700: 925-960 MHz Single Junction Drop-In Circulator Applications Wireless infrastructure LTE systems Features BeO free Operating frequency range: 925 MHz to 960 MHz Insertion loss: 0.25 dB Isolation: 20 dB IMD: 90 dBc (2 50 W CW tones, 5 MHz spacing) Description The SKYFR-000700 is a single-junction circulator designed for wireless infrastructure and LTE applications. It operates over the frequency range of 925 MHz to 960 MHz. Intermodulation Distortion (IMD) is an excellent 90 dBc (2 50 W CW tones, 5 MHz spacing). Insertion loss is less than 0.25 dB over an operating temperature range of 40 C to +85 C. The SKYFR-000700 comes in an industry-recognized package designed for drop-in assembly. A block diagram of the SKYFR-000700 is shown in Figure 1. The absolute maximum ratings of the SKYFR-000700 are provided in Table 1. Electrical specifications are provided in Table 2. Plating information is shown in Table 3. Figure 2 shows the package dimensions. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201589A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 31, 2011 1 DATA SHEET SKYFR-000700 DROP-IN CIRCULATOR Figure 1. SKYFR-000700 Block Diagram Table 1. SKYFR-000700 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Average power PAVG 200 W Peak power PPEAK 1200 W Operating temperature TOP 40 +85 C Storage temperature TST 55 +125 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Table 2. SKYFR-000700 Electrical Specifications (Note 1) (TOP = 40 C to +85 C) Parameter Symbol Test Condition Min Typical Max Units Frequency range f 925 960 MHz Impedance 50 Insertion loss IL 0.20 0.25 dB Isolation Iso 20 23 dB Return loss RL 20 23 dB Intermodulation Distortion (Note 2) IMD 2 x 50 W CW tones, 93 90 dBc 5 MHz spacing Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: See Skyworks Application Note, Intermodulation Distortion Measurements of Ferrites, document number 201537 for further details. Table 3. SKYFR-000700 Plating Section Material Plating Leads Copper Silver Housing Steel Silver Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 May 31, 2011 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201589A