DATA SHEET SMV2019 to SMV2023: Silicon Hyperabrupt Junction Varactor Bondable Planar Chips Applications VCOs Features High Q for low-loss resonators Low leakage current High tuning ratio for wideband VCOs SPICE model parameters Small footprint chip design Skyworks Green products are compliant with all applicable legislation and are halogen-free. Description For additional information, refer to Skyworks Skyworks silicon hyperabrupt junction varactor diodes are Denition of Green, document number processed using established ion-implantation technology SQ04-0074. resulting in low series resistance, wide tuning ratio devices with high Q values. The planar chips have a small outline size (12 x 12 mils, nominal) and are fully passivated, which results in low leakage current and high reliability. These varactor chips are intended for assembly in hybrid integrated circuit resonators used in Voltage Controlled Oscillators (VCOs) and analog tuned filters. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200138F Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice September 9, 2014 1 DATA SHEET SMV2019 TO SMV2023 VARACTORS The SPICE model is shown in Figure 1. SPICE parameters are Electrical and Mechanical Specifications listed in Table 4. Typical performance characteristics are The absolute maximum ratings of the SMV2019 to SMV2023 provided in Figures 2 and 3. varactors are provided in Table 1. Electrical specifications are specified in Table 2. Typical capacitance values are listed in Table 3. Table 1. SMV2019-SMV2023 Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Typical Maximum Units Power dissipation PDIS 250 mW Reverse voltage VR 22 V Forward current IF 100 mA Operating temperature TOP 55 +150 C Storage temperature TSTG 65 +200 C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMV2019-SMV2023 Electrical Specifications (Note 1) (TOP = +25 C, CJ Measured at 1 MHz, Unless Otherwise Noted) Q 4 V, 1 GHz RS IR 17.6 V CJ 0 V CJ 4 V CJ 20 V 50 MHz 4 V (nA) (pF) (pF) (pF) Part Number (Note 2) () (Note 3) Typical Minimum Maximum Minimum Maximum Minimum Typical Maximum SMV2019-000 2.3 0.68 0.88 0.13 0.23 500 4.8 50 SMV2020-000 3.1 1.13 1.43 0.23 0.33 500 4.1 50 SMV2021-000 4.5 1.58 1.98 0.32 0.44 500 2.8 50 SMV2022-000 7.1 2.48 3.08 0.48 0.68 400 2.2 50 SMV2023-000 10.8 4.28 5.28 0.78 1.08 400 1.4 50 Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Exceeding any of the conditions listed here may result in permanent damage to the device. Operation at elevated temperatures may reduce reliability of the device. Note 2: 50 MHz Q calculated from 1 GHz RS and 1 MHz CJ. Note 3: VB at 10 A specified at 22 V, minimum. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 September 9, 2014 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200138F