LE150S-CD
150W Single Output
LED Driver Series
Features
High Efficiency (up to 93%)
Wide Range Universal Input 90-305 VAC
Active Power Factor Correction (0.99 typical)
Constant Current Output
Dimming Function
Lightning Protection
Waterproof (IP67)
Overcurrent, Overvoltage, Overtemperature
Protection
Meets UL8750 & EN61347 Safety
3 Year Warranty
Description
The LE150S-CD Series operate from a 90 ~ 305Vac input range. These units will provide up to a 1.4 A of
output current and a maximum output voltage of 214Vdc for 150 W maximum output power. They are designed
to be highly efficient and highly reliable. The standard features include dimming control, lightning protection,
over voltage protection, short circuit protection, and over temperature protection.
Model Selection
Model Output Output Efficiency* Ripple & Regulation Overvoltage
Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level
LE150S140CD 1330mA-1470mA 53V 107V 89%-90% 91%-92% 3.2V pk-pk max. 1% 3% 128V 161V
LE150S70CD 665mA-735mA 107V 214V 90%-91% 92%-93% 6.5V pk-pk max. 1% 3% 257V 321V
Notes: 1. Efficiency measured at full load, at input voltage noted.
2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR electrolytic
capacitors.
General Specifications
AC Input 90-305Vac, 47-63Hz, 1 Turn On Time 2.0 seconds, max.
1-10Vdc source or External Resistor can be
Input Current 100Vac: 1.8A, 220Vac: 0.9A Dimming
used for dimming control. See below.
Function
Constant Current
Overload
Inrush Current 230Vac, cold start: will not exceed 65A
Protection
Provided - no damage to unit, self-recovery.
XA, 250VAC fuses provided on all models Short Circuit
Input Fuses
Protection
Latch mode. AC input will need to be reset to
Earth Leakage
return to normal operation after an OVP
<0.75mA@277Vac, 50Hz Overvoltage
Current
condition. See chart for trip range.
Protection
Latch mode. AC input will need to be reset
To return to normal operation after an OTP
Overtemperature
Efficiency See Models chart.
condition. Trip Temperature = 110C typical.
Protection
150W continuous
Output Power
www.slpower.com LE150S-CD REV 2.0, 11-FEB-13 1 LE150S-CD
150W Single Output
LED Driver Series
General Specifications (continued)
Operating Operating: -35C to +70C
Ripple and Noise See chart
Temperature Non-operating: -40C to +85C
10% to 100% operating
Output Voltage See chart Relative Humidity
5% to 100%, non-operating
UL8750, UL935, UL1012, CSA-C22.2 No. 107.1,
+/- 3%. See chart
Total Regulation Safety Standards
EN61347-1, EN61347-2-13
340,000 hours (1400mA model, 110Vac input,
Dimensions W: 3.13 x L: 9.37 x H: 1.81 MTBF
80% load, 25C ambient, per MIL-HDBK-217F).
58,000 hours (1400mA model, at 110Vac input,
Weight 1500g Lifetime
80% load, 45C ambient temperature).
EMI/EMC Compliance
Emissions EN55015, Radiated & Conducted with 6db of margin
EMI for Lighting Equipment EN61547
EN61000-4-2, 4kV Contact Discharge, 8kV air discharge
Static Discharge Immunity
EN61000-4-3
Radiated RF Immunity
EFT/Burst Immunity EN61000-4-4
Line Surge Immunity EN61000-4-5, 2kV line-line, 4kV line-earth
Conducted RF Immunity EN61000-4-6
Power Frequency Magnetic Field Immunity EN61000-4-8
Voltage Dip Immunity EN61000-4-11
EN61000-3-2
Line Harmonic Emissions
Flicker Test EN61000-3-3
Derating Curves
Mechanical Drawing
www.slpower.com LE150S-CD REV 2.0, 11-FEB-13 2