TU425S24E SL Power

425W Single Output 425W Single Output TU425 Family TU425 Family Industrial Grade Industrial Grade FEATURES AND BENEFITS Industrial 3.3 x 6.2 x 1.62 Package Approved to EN/CSA/IEC/UL62368-1 Up to 425W of Air-cooled Power, Compliant to High Levels of EMC per 300W Convection EN61000-4 Meets Class B Conducted EMI with 6db Margin Universal Input 90-264VAC Input Range Class A Radiated EMI with 3db Margin 5V at 2A Isolated Standby Output Efficiency 90% Typical Isolated 12V Fan Output 3 Years Warranty Inhibit, Power Fail, DC OK Signals, Cover and Fan Cover Options Remote Sense MODEL SELECTION Output Current (A) Ripple Noise Regulation OCP Threshold OVP Threshold Model Construction Volts Number (Convection) (200LFM air) (mV pk-pk) (% of Vout ) (% Full load) (% Vout) TU425S12E 12V 22.0A 32.2A 120 3% 130%-170% 110%-130% TU425S18E 18V 14.6A 21.5A 180 3% 130%-170% 110%-130% U channel TU425S24E 24V 11.9A 16.8A 240 3% 130%-170% 110%-130% 48V 5.9A 8.4A 480 3% 130%-170% 110%-130% TU425S48E 12V 32.2A N/A 120 3% 130%-170% 110%-130% TU425S12EF TU425S18EF 18V 21.4A N/A 180 3% 130%-170% 110%-130% Enclosure with Fan 24V 16.8A N/A 240 3% 130%-170% 110%-130% TU425S24EF TU425S48EF 48V 8.4A N/A 480 3% 130%-170% 110%-130% 12V 14.2A 26.0A 120 3% 130%-170% 110%-130% TU425S12EC 18V 9.4A 17.4A 180 3% 130%-170% 110%-130% TU425S18EC Enclosure 24V 7.6A 13.0A 240 3% 130%-170% 110%-130% TU425S24EC TU425S48EC 48V 3.8A 6.5A 480 3% 130%-170% 110%-130% Standby Output 5V 2.0A 2.0A 100 5% 130%-200% 110%-130% All Models Fan Output 12V 0.5A 1.0A 360 10% 150%-200% N/A Notes : 1. Total power with 200lfm of forced air cooling is 425W (385W for 12V model) including 12V/1A for Fan output and 5V/2A standby. 2. Maximum convection cooled power is limited to 280W for 12V model and 300W for other models. This includes 12V/0.5A fan output and 5V/2A standby output. 3. Efficiency values listed are typical and are measured at 115VAC input, full load output current, at an ambient temperature of 25C. 4. Measured at 25C ambient with noise probe directly at end of 6 twisted pair terminated with 0.1F ceramic and 10F low ESR capacitors. Values will be higher at ambient temperatures below 0C. 5. Fan Output: If the load on this output is other than a fan, a short circuit condition on this output can only be remedied by removing both the cause of the short circuit and the load. This will allow the output to resume normal operation. 6. No output adjustment for 56V model. 7. MTBF values are in hours, per Telcordia 332, Issue 6, 25C, full rated load (w/airflow) at 110VAC input. TU425 Family Datasheet v1220 Copyright 2020 SL Power Electronics Corp. All rights reserved. Page 1 TU425 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.425W Single Output 425W Single Output 425W Single Output TU425 Family TU425 Family TU425 Family Industrial Grade Industrial Grade Industrial Grade INPUT 100-240VAC, 10%, 47-63Hz, 1 AC Input 120300 VDC (external fuse required for DC input) Input Current 115VAC: 5.2A, 230VAC: 2.5A 264VAC, Cold start: will not exceed 40Arms within cycle. IT = 25A/sec maximum Inrush Current Input Fuses F1, F2: 6.3A, 250VAC <750A 264VAC, 60Hz, NC Leakage Current <1.5mA 264VAC, 60Hz, SFC Efficiency See Model selection chart on page 1 Line Frequency: <2.5Vrms 115VAC, <5Vrms 230VAC, 50/60Hz. See App note for test set-up and Common Mode Noise typical graphs. For high frequency noise, consult the factory OUTPUT Main output: >20ms for 300W 120VAC/60 Hz, >16ms for 383W (90% of 425W) 120VAC/60Hz Hold-Up Time 5VSB output: >500ms Main output: <1 sec max 115VAC, Rise time 30ms max Turn On Time (Main Output) 5VSB turn-on time is 500ms max, Rise time 50ms max. Output voltage rise is monotonic Switching Frequency 75kHz, Typical 425W continuous, with 200 lfm airflow Output Power 300W convection cooled See chart for specific voltage model ratings Output Voltage See chart on page 1. Initial setpoint within 0.5% of nominal. Adjustable +/-5% from nominal (except 56V) 0.5%rms, 1% pk-pk, see Model selection chart on page 1 Ripple and Noise Transient Response 50% load step, i/t: <0.2A/S. Max voltage deviation = 5%. Recover to within 1% of nominal within 500S Not required for main output or 5VSB Minimum Load Fan output: 0.5A min required on the main output in order for the 12V fan output to be within regulation >0.99 115VAC, Full Load Power Factor >0.95 230VAC, Full Load Total Regulation See Model selection chart on page 1 PROTECTION Overtemperature Protection Sensing transformer temperature, 135C (55C ambient temperature at full load), Auto-recovery Overload Protection 130% to 170% of rating, Hiccup mode, Auto-recovery Main output & 5VSB: Cycling type, Auto-recovery. Fan output: Recovery only after removal of short and load. Short Circuit Protection See note 5 on page 1 OVP latch. See chart for trip ranges. 5V standby output (latch). See chart for trip range Overvoltage Protection TU425 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved. TU425 Family Datasheet v1220 Copyright 2020 SL Power Electronics Corp. All rights reserved. Page 2 TU425 Family Datasheet v0819 Copyright 2019 SL Power Electronics Corp. All rights reserved.