Kendall ECG Electrodes Product Data Sheet Arbo H124SG Ref. Code: 31.1245.21 1. BASiC PRoDuCt infoRmA tion 5. PACKAGinG Shape / size (excl. grip) Round / 24 mm L x W x H (mm) Content (electrodes) Material 2 Total product surface (excl. grip) 452 mm Product packaging (pouch) 220 x 180 50 Paper / PE / Alu / PE 2 Gel area 201 mm Department packaging (box) 194 x 194 x 240 500 Paper cardboard 2 Adhesive area 251 mm Transport packaging (carton) 600 x 400 x 510 6000 Paper cardboard 2 Sensor area 80 mm Product thickness (adapter excluded) 1 mm Adapter Stud 6. BioComPA tiBility Integrated lead wire (length / colour) Test acc. to DIN ISO 10993 passed LATEX content no 2. mAtERiAlS infoRmA tion Backing material Polyethylene foam (PE), white 7. EnviRonmEnt (detailed information related to product Adhesive characteristics Medical grade pressure sensitive adhesive and packaging see Environmental Declaration) Gel characteristics Conductive and adhesive hydrogel Halogenated hydrocarbon content (e.g. PVC) no Supporting / back label Polypropylene film (PP) transparent Phthalate derivatives content (e.g. DEHP) no Release liner Polyethylene film (PE), one side siliconized RoHS directive in compliance Sensor Polymer Ag/AgCl coated Adapter / connector Stainless steel Integrated lead wire jacketing 8. SHElf lifE Integrated lead wire cord Product shelf life in an intact, originally sealed packaging 24 months 10 30 C 3. El ECtRiCAl CHARACtERiStiCS 9. lEGAl St AtuS (AnSi/AAmi EC 12, average measured before packaging) CE Mark according to MDD 93/42/EEC CE marked ACZ I impedance (before defibrillation simulation) 220 Ohm DC offset voltage (before defibrillation simulation) 0.2 mV SDR (remaining potential after defibrillation simulation) 11 mV Slope (potential decline after defibrillation simulation) 0.2 mV/s COIIN (combined offset instability and inner noise) 4 V Bias current tolerance (DC offset voltage after DC loading) 6 mV 4. SPECiAl fEA tuRES MRI compatibility (< 3T) no X-ray translucence no Disclaimer: Specifications and other information presented in this Peel off resistance, max. (from PE foil, 180 , 50 mm/min, ASTM D1876) 2.5 N document are for information purpose only and do not provide Integrated abrader no any recommendation or advise of any kind. Data may differ from Repositionability no actual values quoted here and Tyco / Covidien does not make any warranties or representations to any characteristics. Subject to changes without notice. COVIDIEN, COVIDIEN with logo and marked brands are trademarks of Covidien AG or an affiliate. 2008 Covidien AG or an affiliate. All rights reserved. 31124521e2008-10-06 TY0648 MED 2009 PM 0013 Covidien (UK) Commercial Ltd +44 (0) 1329 224226/224411 t www.covidien.com 154 Fareham Road +44 (0) 1329 224334/224390 f Gosport Hampshire PO13 0AS uksales covidien.com e United KingdomX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Biometric Sensors category: Click to view products by SparkFun manufacturer: Other Similar products are found below : NPC-120T ADPD142RG-BCEZ-RL AFE4410YZR AFE4410YZT NPC-100T AS7026GG AS7026GG-COLM AS7030B-COLM AS7038RB-COLM AS7038GB-COLM ADUX1020BCPZRL7 MAX32664GTGC+T MAX32664GTGB+T MAX32664GTGZ+ MAX30112EWG+T MAX86140ENP+T MAX30110EWG+T MAX32664GWEA+T MAX32664GWEB+T MAX32664GWED+T MAX86916EFD+ MAXM86161EFD+ MAX32664GWEA+ B5T-001001(G) B5T-007001-010 MAX30034CUA+ SFH 7072 SI1144- AAGX-GM SEN-12969 B5T001001G SFH 7070 MAX30110EWG+ 20-0584 20-0599 20-0696 B5T-007001-020 10184000-01